-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Flexible Thinking: Process Engineering—PCB Manufacturing’s ‘Delta Force’
May 13, 2016 | Joe Fjelstad, Verdant ElectronicsEstimated reading time: 1 minute
The role of the process engineer is arguably one of the most important jobs in the printed circuit industry. The process engineer is on the front line of manufacturing and responsible for making sure product yields and profitability meet expectations. The job typically entails and intertwines many different and even disparate disciplines, including: electrochemistry, mechanical engineering, NC machining, robotics and automation, metallurgy, laser technology, polymer processing and photolithography. It even reaches back into the printed circuit design process. Because of this variety, it is also arguably at once, one of the most challenging and interesting jobs in the PCB industry.
In practice in most major manufacturing facilities, process engineers often specialize in just one of the areas identified here. In smaller facilities, the process engineer often must move between and attend to matters in more than one discipline, most commonly process steps which immediately precede or follow the area where the engineer has special training and expertise. However, in many cases, factors which may influence product quality and yield may be several steps earlier or later in the process. This is extremely important when one is looking into, or in the midst of implementing a new process on the manufacturing floor. Change comes slowly in PCB manufacturing and old habits are hard to break, so keeping a finger on the pulse of the process is critical.
It is a simple fact of life that in PCB manufacturing, process characterization, monitoring and maintenance are critical to success, and so also is collecting and evaluating data on process health. The tools and specific methods and measurements required will vary significantly from process to process, but without control, the quality of the results of the process will be left to a roll of the dice.
Editor's Note: This article originally appeared in the April 2016 issue of The PCB Magazine
Suggested Items
SEMI Applauds U.S. Chips Act Award for Samsung Electronics Facilities to Strengthen Domestic Semiconductor Supply Chain
04/17/2024 | SEMISEMI, the industry association serving the global electronics design and manufacturing supply chain, applauded the United States Department of Commerce’s announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support the expansion of Samsung Electronics’ presence in Texas and the company’s development and production of leading-edge chips.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
SIA Applauds CHIPS Act Incentives for Samsung Manufacturing Projects in Texas
04/16/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer applauding semiconductor manufacturing incentives announced by the U.S. Department of Commerce and Samsung.
Report Reveals ‘True Impact’ of Manufacturing is Nearly a Quarter of UK GDP
04/15/2024 | Manufacturing Technologies AssociationManufacturing is having a far greater impact on the UK economy than first thought according to a major new report released today.
Design Community Town Hall Review
04/11/2024 | Kelly Dack, CID+, EPTACThe Design Community Town Hall took place on the afternoon of April 10, 2024. I was fortunate to attend this event, which marked an opportunity for members of some newly found design groups to get together and exchange ideas. Peter Tranitz, senior director of solutions for IPC, opened the session with a slide presentation introducing these new groups and members within the solutions department.