All About Flex: High-Temperature Performance Flexible Circuits
January 21, 2016 | Dave Becker, All FlexEstimated reading time: 2 minutes
Markets requiring thermal exposure at elevated temperatures include down-hole oil drilling, semiconductor processing, medical diagnostics and a multitude of military/aerospace requirements. But a limitation of flexible circuitry has been performance at extremely high temperatures. For purposes of this discussion, the definition of “extremely high” is temperatures that exceed 150–200°C on a continuous basis or 288°C on an intermittent basis[1]. The flexible circuit industry has made inroads improving this product feature with recent developments and significantly improved high-temperature performance, which is being accomplished with new material constructions requiring some unique fabrication processing.
The adhesive system used to bond the various layers in a flexible circuit is normally considered the weakest link when parts are exposed to high temperature or a harsh chemical environment. This weakness has driven adoption of adhesiveless base laminate technology (the word “laminate” remains an industry term but is a bit misguiding when describing adhesiveless structures as they are not generally produced with a laminating process). Multiple methods for creating an adhesiveless base laminate substrates have become common (copper sputtering, vacuum deposition, cast polyimide) and provide improved performance in both extreme thermal and chemical environments.
But the most frequently used “top side” flexible circuit insulation is generally another layer of polyimide film commonly called coverlay or coverfilm. This layer of film is coated with an uncured adhesive and positioned onto the etched circuitry pattern and then permanently fastened during a temperature/pressure lamination cycle in a platen press. Consequently, an adhesive has been reintroduced into the circuit composite, despite removing the adhesive in the base substrate. Another top side dielectric used in the world of flexible printed circuits is a photo-imaged soldermask, but this material often becomes brittle at elevated temperatures, and can fracture or flake off when bent or folded.
Page 1 of 2
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.