-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
ARC Technologies Exhibiting at Design Con 2016
January 21, 2016 | ARC TechnologiesEstimated reading time: 2 minutes
ARC Technologies is showcasing its wide range of capabilities to solve microwave and RF interference, radar absorbing, and EMI control challenges at 2016 Design Con (www.designcon.com) in Santa Clara, CA.
Learn more about ARC Technologies new testing capabilities and solutions, including their newest Hot Melt Absorbers, Focused Beam Testing system providing electromagnetic test capabilities up to 110 GHz, the ARC Clear Conductive Electromagnetic Shielding AC2ES™, and the latest automotive anti-collision radar materials.
The latest Hot Melt Absorber product line gives the customer a very simple and fast way to apply absorber to a surface that requires noise suppression, for example a PCB. Different hot melt products are available depending on application and frequency requirement.
The AC2ES is an advanced, optically clear, transparent, thin-film conductor that provides excellent EMI shielding and conductivity. It is a robust, ultra-thin, flexible film incorporating conductive nanoparticles and a low-cost direct replacement for Indium Tin Oxide (ITO) films. AC2ES is available in flat or 3D form, or can be supplied pre-cut to exact customers’ specifications.
Addressing automotive radar designers and autonomous vehicle technology needs for accuracy and reliability, ARC Technologies has perfected a family of optimal RF noise mitigation materials. These materials can be formulated, molded or otherwise fabricated to best suit the application. ARC Technologies can help get technology up to speed with new radar absorber products SB1009, SB1006, and MC1000. Its SB and MC series absorbers are weather and chemical resistant and are suitable for use on the vehicle body, bumpers and other exterior surfaces.
ARC provides material testing and qualification services to many ASTM and MIL standards. It offers electromagnetic test capabilities up to 110 GHz with the addition of a focused beam system. Measuring a material’s permittivity (ε) and permeability (μ) is critical in the design and development of high frequency materials and systems. The ARC Technologies Inc. focused beam system allows for non-destructive, accurate measurements of these material parameters, including reflection and transmission loss, from 2-40 GHz and 75-110 GHz. The testing service provides customers a more affordable and fast way to turn around their testing needs.
Page 1 of 2
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
Electra Polymers Ltd Expands Manufacturing Capacity, Invests in New Facilities and Talent
03/26/2024 | Electra Polymers LtdElectra Polymers Ltd, a leading provider of coatings for the electronics industry, proudly announces a significant expansion of its manufacturing capacity for inkjet materials. The company is making substantial investments in new facilities, talent acquisition, and cutting-edge laboratory equipment to meet the increasing demand for high-performance functional inkjet materials in the market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/22/2024 | Nolan Johnson, I-Connect007This week's news feed contains a bunch of big money items, as well as some interesting industrial and technology puzzles to be solved. There’s even some down-home people news from the Dallas SMTA conference held this week. Don’t overlook the latest issue of PCB007 Magazine, either. The topic is sustainability, which is becoming an ecosystem of its own.