-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Graphic Group Exhibiting at DesignCon Show
January 18, 2016 | Graphic GroupEstimated reading time: 1 minute
Graphic Group, a global manufacturer of high-technology printed circuit boards, will be exhibiting at the DesignCon Show, Santa Clara Convention Center, Santa Clara CA on January 20 & 21. Graphic will feature an assortment of complex Rigid, Rigid Flex, Flex Circuit and Flex Heater products for the Medical, Military, Aerospace, Automotive and Consumer industries.
The DesignCon Show features over 160 elite vendors and is the largest meeting of board designers, and is the ONLY event to address chip design engineers' chip/system/package challenges. Attendees will discover and evaluate the latest high-speed design tools, technologies and developments in the chip, board and system design industry. Graphic Group will be located in Booth 1251.
Graphic Group is one of the most technically competent manufacturers of high-technology printed circuit boards. With headquarters in the UK and full service manufacturing facilities in the USA and China, Graphic focuses on leading edge technology released to the most demanding international quality standards.
Graphic is an expert at prototyping and developing new "first to market" products. With facilities in the UK, United States and in China for medium to large volume production, the Graphic Group is able to offer the complete service from Application Engineering support to volume PCB manufacture.
HDI technology includes Rigid and Flex-Rigid Printed Circuit Boards with blind vias, buried vias, blind micro-vias, copper filled micro-vias, resin filled vias, stacked vias, sequential build-up, buried resistance and buried capacitance.
More Information can be found at www.graphic.plc.uk, www.graphic-usa.com and www.rigidflex-graphic.com
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?