T-Tech Releases IsoPro 3.2


Reading time ( words)

T-Tech, the manufacturer of the Quick Circuit line of rapid prototyping systems, has released IsoPro 3.2 software. This is the first major software release this year.

From user feedback our customers asked for an Isolation program which could produce Isolation data in G-Code format. IsoPro 3.2 provides these services allowing a company the opportunity to manufacture printed circuit boards on the Quick Circuit, in house, within an hour from the time the schematic and layout are completed.

The Contact-by-Touch software feature for the Quick Circuit QCJ5 is new and improved. You can now calibrate the depth of cut with the tool touching off the surface of the material in an average of five seconds from the time the tool has changed. This kind of precision calibration has never been achievable on a rapid prototyping machine before.

The real-time milling progress within IsoPro 3.2 is greatly enhanced. This allows the operator to automatically align multilayer PCBs in their lab. From over 10,000 customer installations in over 78 countries, scientists, electrical engineers and technicians now have an improved capability to produce prototype circuit boards in an environmentally friendly fashion.

For more information about IsoPro 3.2, contact sales@t-tech.com or call 800-370-1530.

You can also learn more about IsoPro 3.2 at PCB West in the Santa Clara Convention Center in Santa Clara, California. T-Tech is located in booth #500.

Share

Print


Suggested Items

John Watson Discusses His Favorite Career Moments

12/25/2020 | I-Connect007 Editorial Team
As we celebrate the holidays after a tumultuous year, it’s important to remember all of the good things in our lives. In this short video, Altium’s John Watson discusses a few of the moments that really stand out in his career: earning his IPC Certified Interconnect Designer credentials and designing his very first circuit board.

Flexible Circuit Technology Workshop #5 Tackles Structures, Applications, Materials, and Manufacturing Processes: Think and Plan in Three Dimensions!

10/01/2020 | I-Connect007 Editorial Team
In just 15 minutes, flex expert Joe Fjelstad will teach you about implementing this useful technology into your manufacturing operation. Joe suggests you start with defining your end-product requirements and understanding cost and product life cycle expectations, as well as end-user needs. He further addresses the many considerations with adopting this useful technology.

Book Excerpt: Power Integrity By Example, Chapter 5

07/16/2020 | Fadi Deek, Mentor, a Siemens Business
The following is an excerpt from The Printed Circuit Designer's Guide to... Power Integrity by Example, written by Fadi Deek of Mentor, a Siemens Business. In this free eBook, Deek addresses problematic issues within electronic transmissions, and presents a variety of simulations and analyses in every chapter.



Copyright © 2021 I-Connect007. All rights reserved.