DfR Solutions Releases Sherlock 4.1
August 12, 2015 | DfR SolutionsEstimated reading time: 2 minutes
DfR Solutions, leader in quality, reliability, and durability (QRD) solutions for the electronics industry, has announced the release of the newest version of Sherlock Automated Design Analysis software, version 4.1. This version of Sherlock now translates Shock Response Spectrum (SRS) Analysis into Power Spectral Density (PSD) Curves. The real value to users is the ability to predict random vibration events of electronic hardware more precisely than any tool currently available on the market. Additional enhancements in this version of Sherlock include an updated package manager, improved analysis capabilities, and a modified user interface.
Developed over 80 years ago, shock response spectrum (SRS) is used as an approximation of shock loads (explosion, seismic, launch, landings, etc.) early in the product development process. While SRS has now become the default technique for evaluating large structures in severe environments (like rockets, tanks, and airplanes), it is inadequate in capturing the risk of electronics within these same applications. Sherlock version 4.1automatically converts SRS into much more relevant Power Spectral Density (PSD) Curves. Through an understanding of the likely range of nodal responses, Sherlock allows users to incorporate SRS into the already powerful simulation and modeling capabilities within Sherlock. Failure risks can be more accurately predicted and Sherlock users can now introduce potential mitigations at the board, box or system level much earlier in the new product development process.
Additionally, the updated Package Manager now allows for users to create new packages or copy existing packages. Previous versions of the package manager only allowed for properties of existing packages to be modified. Other updates include improved part validation analysis, life prediction charts, and thermal event analysis.
“Repeated shock is a major concern in many high-risk environments like aerospace, avionics and defense,” stated DfR Solutions CEO Craig Hillman. “Electronics in these conditions are subject to extreme levels of shock, unlike any other industry. Traditionally, SRS calculations have flowed down from very large structures (such as the rocket tube) to perform to assess this risk."
"But those SRS calculations are a gross approximation and do not take into account the specific mechanical response of the electronics to shock. This enhancement to Sherlock incorporates our deep knowledge of electronics and provides the designer, manufacturer, and system-integrator with the tools to gain deeper visibility into their risk of failure under real world conditions,” said Hillman.
About Sherlock Automated Design Analysis Software
Sherlock is the first-of-its-kind Automated Design Analysis software for analyzing, grading, and certifying the expected reliability of products at the circuit card assembly level. It is used by the electronics industry across all markets. Sherlock continues to evolve, incorporating new innovations and enhancements allowing users to manage increasingly complex analyses faster and more efficiently than ever before.
About DfR Solutions
DfR Solutions has world-renowned expertise in applying the science of Reliability Physics to electrical and electronics technologies and is a leading provider of quality, reliability, and durability (QRD) research and consulting for the electronics industry. The company’s integrated use of Physics of Failure (PoF) and Best Practices provides crucial insights and solutions early in product design and development and throughout the product life cycle. DfR Solutions specializes in providing knowledge- and science-based solutions to maximize and accelerate the product integrity assurance activities of their clients in every marketplace for electronic technologies (consumer, industrial, automotive, medical, military, telecom, oil drilling, and throughout the electronic component and material supply chain). For more information regarding DfR Solutions, visit www.dfrsolutions.com.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).