Beyond Design: Learning the Curve


Reading time ( words)

Currently, power integrity is just entering the mainstream market phase of the technology adoption life cycle. The early market is dominated by innovators and visionaries who will pay top dollar for new technology, allowing complex and expensive competitive tools to thrive. However, the mainstream market waits for the technology to be proven before jumping in. Power distribution network (PDN) planning was previously overlooked during the design process, but it is now becoming an essential part of PCB design. But what about the learning curve? The mainstream market demands out-of-the-box, ready-to-use tools.

The mainstream market, representing more than 65% of the total EDA software market, wants established technology at an affordable price. The majority of high-end tools require a PhD to drive. However, the mainstream market demands tools that are intuitive and can be used by any member of the development team from EEs to PCB designers to achieve quick results.

Inadequate power delivery can exhibit intermittent signal integrity issues. These include high crosstalk and excessive emission of electromagnetic radiation, degrading performance and reliability of the product. The PDN must accommodate variances of current transients with as little change in power supply voltages as possible. So the goal of PDN planning is to design a stable power source for all the required power supplies. As with stackup planning, the PDN design is required before a single IC is placed on the board.

Also, the same PDN connections (planes) that are used to transport high-transient currents are used to carry the return currents for critical signal transmission lines. If high-frequency switching noise exists on the planes, coupling may occur, resulting in ground bounce, bit failure or timing errors. Many failures to pass electromagnetic compliancy (EMC) are due to excessive noise on the PDN coupling into external cables and radiating emissions.

If you are not familiar with a PDN plot (AC impedance vs. frequency), it can be awfully daunting at first. 

To read the rest of this column, which appeared in the April 2015 issue of The PCB Design Magazine, click here.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/20/2023 | Andy Shaughnessy, Design007 Magazine
We’re in the middle of show season, and it certainly “shows.” Thank you very much. I’m here all week. Don’t forget to tip your wait staff. This week, we published a variety of articles, columns, and news items, and much of it centered on trade shows. Technical Editor Dan Feinberg brings us a report from CES 2023. IPC announced the winners of the Best Technical Paper awards for IPC APEX EXPO 2023. And we have an interview with Altium’s Rea Callender about the company’s educational efforts at APEX and around the globe.

Altium Focuses on Design Education

01/16/2023 | I-Connect007 Editorial Team
Altium keeps its eyes on the designers of the future. The company has been working with colleges and universities for years, providing free seats of Altium Designer for the next generation of PCB designers and design engineers. At IPC APEX EXPO 2023, Altium will be providing software for the finalists in the IPC Design Competition just as it did last year. They offer a variety of other educational programs as well, including Upverter classes and a design competition that aims to address environmental change. Here, Rea Callender, Altium’s VP of education, discusses its educational programs and plans for the week of the show.

The Battle of the Boards

01/12/2023 | Patrick Crawford, IPC
Last year, IPC held its first-ever design competition at IPC APEX EXPO in San Diego. PCB designers from around the world competed in a series of heats during the months before the show, culminating in a showdown on the show floor between the top three finalists. Rafal Przeslawski, now with AMD, took home the top prize last year. This year, the competition is back for its sophomore year. I asked Patrick Crawford, manager of design standards and related programs for IPC, to “layout” the details on the design contest, including lessons learned in 2022 and what’s new for the 2023 competition.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.