A Conversation (and Day) with Joe Fjelstad, Part 1


Reading time ( words)

Joe Fjelstad spent a day with me recently as we toured the Evergreen Aviation & Space Museum (home of the Spruce Goose), located in the Oregon community of McMinnville. Our conversation ebbed and flowed between a wide variety of topics, from the electronics industry, to political shenanigans and the “war against failure.” In Part 1 of this multi-part series, Fjelstad introduces his “war against failure” idea, and what went terribly wrong in the advent of lead-free manufacturing. 

spruce_goose.jpgBarry Matties: Joe, you’ve mentioned to me recently that you are changing your approach to the world—that your message is different. You said, “the war is against failure.” What do you mean by that?

Joe Fjelstad: Ah yes, the war on failure. It is a recent epiphany of mine that failure is the true enemy of electronics. It is the disease, not the symptom, which must be attacked. To date, the industry has largely focused attention on trying to make something reliable using materials and processes that are intrinsically weak. It is a Sisyphean task that will never end. It's like the arcade game Whack-a-Mole. You bang down one problem and a new problem pops up in its place somewhere else.

Much of the challenge and most of the problems are related to solder, which has gotten worse with the introduction of lead-free, a movement that I and others rallied against for several years without success, having seen that the science did not support the claims of the proponents. On the bright side, that failure was what led to the inspiration for manufacturing electronics without solder. That said, I continue to pursue that goal. However, truth be told, I would be perfectly satisfied, and I've said this on more than one occasion publicly, if the only thing that came out of my effort was that the EU reversed the ban on lead in tin-lead solder. A lot of lead has been used in electronics over the last several decades and nobody was ever harmed by it. Well I take that back. An uncounted number of people in Asia and South Asia have been harmed by leaded solder in reclamation activities there. However, that failure and onus rests at the feet of unscrupulous businesspeople in the West, who were shipping electronic waste to those areas without giving people education and training as to what the hell they were doing and what the risks were. It was a case of capitalism gone awry and innocents victimized in the process. Elimination of lead from paint and gasoline were excellent decisions relative to human health; the elimination of lead from solder, except in the case just mentioned, was, at the end of the day, an expensive and wasteful exercise with ongoing expensive ramifications.

Broken_Solder_joint.jpgMatties: I was listening this morning on the news about the lead-free exemption for the military and they were talking about how that may even disappear. What do you think of that as a possibility?

Fjelstad: I would say that fundamentally it has already disappeared.

Matties: Is that because components just aren't available?

Fjelstad: Yes, and that's the great irony. I made a point of that in my recent talk at the IEEE Aerospace conference in Big Sky, Montana. Here's the scenario: Presently the military is exempt and can use tin lead solder. However, the military transitioned to commercial-off-the-shelf (COTS) parts because it was going to be cheaper to make their electronics. It makes a good deal of sense. In fact, when I worked on the Land Warrior project with Pacific Consultants, we built the entire soldier-of-the-future system out of COTS. Colonel Jette, the Pentagon’s project manager overseeing this whole development made very clear his desire to use COTS. At the time, Pacific Consultants, which consisted of 35 to 40 scientists and engineers, went up against General Dynamics, Raytheon, and Motorola for the contract, and we beat them. The reason we beat them is because we actually made what the Pentagon asked for in its procurement spec. When it came to delivery, the product had the right look and feel as well as performance. In contrast, some of the competitive solutions delivered were quite bizarre. The military industrial complex got that name for a reason. It's because the military is so interwoven with the aerospace and weapons industries.

Anyway, we beat them and built the system completely out of commercial, off-the-shelf hardware. That makes sense to try and control your budgets and we built it with success and within budget, but did not win the production contract. That was given to one of the big boys. Now fast forward to what you have today with lead-free. Who drives the electronics industry? It’s not the military. They had their turn—back in the '60s and '70s; now they're just the caboose at the end of the train.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

09/23/2022 | Andy Shaughnessy, Design007 Magazine
It’s officially fall now, and in Atlanta the temperature has plummeted to the mid-80s. We’ve all bumped our air conditioners up to 74 degrees. That means it’s trade show season, and I’ve been busy looking for my suitcase. This week, we have an assortment of news about associations, education, and advocacy, as well as another installment of our Printed Electronics Roundtable. And if you’re looking for a job, you are in luck; our jobConnect007 section is chock-full of open positions at all levels in this industry.

IPC: Companies Are Intentional About Tracking Environmental and Social Risks

09/22/2022 | Suhani Chitalia and Kelly Scanlon, IPC
Leading companies in the electronics manufacturing industry are highly intentional about their environmental, social and governance (ESG) priorities, with climate change and energy use among the most closely scrutinized issues, an IPC analysis shows. As part of IPC’s ESG for Electronics initiative, IPC is interested in developing resources for members on the most common ESG methods and priorities of leading companies across the electronics value chain. In support of this, IPC has preliminarily analyzed the ESG reports of approximately a dozen companies in selected portions of the industry.

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

09/22/2022 | Pete Starkey, I-Connect007
“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.



Copyright © 2022 I-Connect007. All rights reserved.