Isola Launches Low-loss Laminate for 100 GB Ethernet Apps


Reading time ( words)

I spent time at IPC APEX EXPO 2015 talking about Isola’s launch of a low-loss, low-skew laminate prepreg with Fred Hickman, senior director of high-speed digital products. Hickman explains that the new material, Chronon, will be one of the enablers of 100 GB Ethernet applications.

Pete Starkey: Fred, it’s great to meet you. As the senior director of high-speed digital products at Isola, you are the ideal person to tell us about the new product launch. The brand is Chronon and it's a low-loss, low-skew laminate prepreg. Could you just give me a short introduction to this material?

Fred Hickman: Thanks for coming by, Pete, and thank you for giving me a chance to introduce you and your readers to Chronon. Chronon is indeed a new low-loss material for us. Essentially, it's one of the enablers, we think anyway, for 100 GB Ethernet applications, with a combination of good DK, 3.64 DK, less than .004 loss, but also excellent for skew. Fiber weave affects skew so it is a skew mitigator. So what we're proposing for people who currently use other competitive materials on the market, this is a drop-in material with very similar electrical, but very much improved skew mitigation capabilities.

So we have this product, Chronon, and last year we also introduced Tachyon 100G. Both have lower insertion loss, but Tachyon does not have the same ability to mitigate skew as Chronon.

Starkey: Are you in a position to give me a brief explanation as to how you've gone about minimizing the skew? What is it about normal materials that causes skew and how can that be overcome?

Hickman: With most materials, when you change the resin content it has a very big impact on the DK of the material. For instance, our best skew mitigator is GigaSync, changing the resin content from 50% all the way up to 75% and you get about a 3% change in the DK. So if you have lines going across resin/glass it doesn't matter because the DK basically stays the same. With Chronon, the DK change is only about 9% and in that same range, but with most other materials the DK range is around 20%.

Starkey: Oh, I see.

Hickman: So essentially what we're doing is using a combination of spread glass, also some proprietary engineering techniques with which we're minimizing the weave effect of glass.

Starkey: I understand now. It’s really on a microscopic scale. Because there's such a difference in product and concept between glass and resin, if you've got a material where the signal has a glass-rich area and a resin-rich area, you can sort of smooth that out while still keeping the benefits of woven glass reinforcement, but having that reinforcement much more uniformly distributed through the substrate.

Hickman: Absolutely. You hit it right on the head.

Starkey: Well, Fred. Thanks very much indeed.

Hickman: Thank you, Pete. 

Share




Suggested Items

Engineering RF Dielectric Material to Enable 5G/6G Antenna Devices

04/11/2022 | Chudy Roosevelt Nwachukwu, ITEQ Corporation
Accurate characterization of frequency-dependent inhomogeneous dielectric material properties is key to the optimal design of high performance and cost-effective PCB antennas. These antennas will be required to enable the plethora of devices forecasted for 5G/6G communication. Therefore IT-88GMW, an advanced resin system reinforced with tightly woven thin glass fibers has been formulated to improve the Q-factor of interconnects and passive components fabricated on PCB laminates.

Improved Thermal Interface Materials For Cooling High-Power Electronics

03/31/2022 | Jeff Brandman, Aismalibar North America
Heat has been a significant concern in electronics since the beginning of the electronics age when hot glowing vacuum tubes were first used to receive and transmit data bits. The transistor and integrated circuit effectively solved that basic problem, but increases in integration resulted in increased concentration of heat, exacerbated by relentless increases in operating frequency. While improvements in electronics technology have been able to mitigate many thermal issues at chip level thanks to improved semiconductor designs devised to operate at lower voltages (thus requiring less energy) the thermal management challenge continues to vex electronic product developers.

Institute of Circuit Technology: A Novel Approach to Recycling PCBs

03/10/2022 | Pete Starkey, I-Connect007
A two-year project funded by an Innovate UK SMART Grant aims to reduce the impact of e-waste using naturally derived, biodegradable and nontoxic products. Those attending the webinar for the Institute of Circuit Technology’s annual meeting on March 2 learned more about the project, as well as statutory paperwork obligations of the UK REACH regulations. Following the formal business, ICT Chair Emma Hudson introduced and moderated this technical webinar.



Copyright © 2022 I-Connect007. All rights reserved.