Reliability and Harmonization of Global Standards at Forefront of EIPC Efforts


Reading time ( words)

At IPC APEX EXPO 2015, I caught up with EIPC’s Michael Weinhold and Alun Morgan for a discussion on both recent and ongoing focuses for EIPC, and the importance of the alignment of global standardization processes, especially for Asia.

Pete Starkey: I'm here with two gentlemen from the European Institute of Printed Circuits Technical Director Michael Weinhold, and Chairman Alun Morgan.

Alun, can you get us started by describing the successes of recent times since you joined EIPC? You had a conference recently. What was the outcome of the conference?

Alun Morgan: Yes, we had a very successful conference in Munich at the beginning of February. In fact, that marks the fifth event that we've had this year, so we've carried out four workshops and one conference in the space of the first, say, five weeks of the year. That’s pretty encouraging. The conference was in Munich. We attracted nearly 90 delegates from 11 different countries to attend. We usually find the conferences work very well when we have a good agenda, which means we have good technical presentations. We have an accessible venue, which Munich certainly was. And third we have a good attraction. We were able to organize a visit to the Eurofighter production line in Manching, courtesy of Airbus Defence and Space, which I was very pleased they agreed to. I think those three things came together and gave us a very exciting conference.alun_morgan_interview.png

Highlights include a session on reliability, which was very well reviewed and commented upon, and we will certainly run a road show of workshops on reliability. So we'll bring together some of the key speakers from the events and we'll run those out into the next few months where we hope to attract a lot of interest.

The other item we covered in some detail was signal integrity, which is becoming more and more important in many applications. We had a very nice overview of that, including an aspect from a chemical supplier, who has proposed a new treatment for the oxide side of copper. We know very well what the profile of copper does to signal integrity. Then we got another view that we haven't really had in the last couple of years that really made it nice and rounded. So now we have a very nice view from the people like Polar Instruments, who provide the test equipment, from the board shops, the fabricators, from chemistry supplies and for laminate suppliers.

All in all, a great package that we can also road show as a training workshop. So I think we'll certainly roll that out in the next few months. We're looking forward now to SMT in May which will be in Nuremberg, where again I've been invited to deliver a keynote speech in the PCB forum. And then our next conference in June will be in Berlin.

Starkey: May I ask you what will be the topic of your keynote speech?

Share




Suggested Items

PCB Technologies’ InPack to Focus on Miniaturization, Packaging

05/16/2022 | Andy Shaughnessy, Design007 Magazine
I recently spoke with PCB Technologies’ Jeff De Serrano, Yaniv Maydar, and Alon Menache about their new venture, InPack. They explain their plans to focus on advanced packaging, miniaturization, and other high-end technology, with much faster time to market, and they offer a view of the global market as well.

EIPC Technical Snapshot: Supporting Autonomous Driving

05/12/2022 | Pete Starkey, I-Connect007
EIPC’s 17th Technical Snapshot webinar on May 4 focused on developments in automotive electronics, particularly on advances in the technologies required to support the evolution of autonomous driving. The team brought together two expert speakers to present their detailed views on topics encompassed within “CASE,” the acronym that appears to be taking over the automotive industry.

Catching up with EISO Enterprises’ President Gary Chien

04/19/2022 | Dan Beaulieu, D.B. Management Group
While there are many Chinese companies now selling in the United States, I wanted to find one in Taiwan that is penetrating the U.S. market. I was delighted to come across EISO Enterprise Co. Ltd., a printed circuit board fabricator located in Taiwan. I know that the American companies are usually looking for PCB global partners in countries other than China, which made my conversation with Gary (Jung Kun) Chien all the more interesting, especially when he shared his thoughts on the U.S-China trade wars.



Copyright © 2022 I-Connect007. All rights reserved.