-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
iNEMI Publishes 2007 Research Priorities
October 4, 2007 |Estimated reading time: 3 minutes
The International Electronics Manufacturing Initiative (iNEMI), an industry-led consortium focused on identifying and closing technology gaps, has published its 2007 Research Priorities. This document identifies R&D priorities for the next 10 years by combining findings from the 2007 iNEMI Roadmap with R&D needs identified through follow-on gap analysis meetings. This information not only helps iNEMI focus its deployment projects on high-impact areas where the consortium can make a difference in the marketplace, but it also assists corporate research labs, government funding agencies and academic research centers in focusing limited resources on those critical areas that will yield the greatest return.
"It is only through effective prioritization of limited R&D programs that the electronics industry will be able to maintain the technology leadership that it has enjoyed for the past 50 years," said Alan Rae, iNEMI's director of research and vice president for NanoDynamics, Inc. "The 2007 iNEMI Research Priorities document has been prepared to aid this prioritization, facilitating more focused investments for an improved rate of return. With a steady stream of research results to harvest, the electronics industry can continue to enjoy growth and prosperity driven by our society's adoption of breakthrough products that increase productivity and improve lifestyles."
More than 90 research needs were identified in the 2007 iNEMI Roadmap. iNEMI's Research Committee grouped these needs into five research areas -- manufacturing processes, system integration (IT and technology integration), energy and the environment, materials and reliability, and design -- and identified the top priorities for each area. In some areas, needs had shifted since iNEMI published its last set of research priorities (the 2005 Research Priorities, based on the 2004 iNEMI Roadmap), and some remained the same, as summarized below.
Manufacturing Processes -- The top priority shifted from development of reduced cost manufacturing processes that support rapid miniaturization to development of a new methodology/strategy for R&D to be conducted in the global outsourcing environment.
System Integration -- As disparate technologies continue to be combined into product architectures, several integration challenges face the industry that will limit the ability to improve cost, size and reliability. While there is still a need to continue improvements to the IT infrastructure (which was the top 2005 research priority), the top research need currently identified for this research area, is the development of 3D interconnect structures with associated thermal management. The need for standardized test methods/figures of merit for printed electronics was identified as the second priority for 2007.
Energy and the Environment -- The top two research priorities for this area essentially remain the same: (1) the development of sound scientific methods to evaluate environmental impact of materials and (2) research into the development of new innovative energy sources.
Materials and Reliability -- The top research priority in this area is the development of the next generation of solder alloys with better area array shock, lower cost, lower temperature and reduced copper dissolution issues. (This need was identified as the number four priority in 2005.) The number two research priority for 2007 is the development of halogen-free materials, which did not show up during the 2005 process.
Design -- The top priorities for design are: (1) improved, integrated and standardized DfX tools for compatibility across supply chains; and (2) low-cost solutions for carrying >10Gb/s signal rates between components on a PCB. Neither of these topics was identified in the 2005 Research Priorities.
The 2007 Research Priorities can be downloaded from the iNEMI website at
http://thor.inemi.org/webdownload/RI/iNEMI_2007_Research_Priorities.pdf
(Due to its length, this URL may need to be copied/pasted into your Internet browser's address field. Remove the extra space if one exists.)
About iNEMI
The International Electronics Manufacturing Initiative's mission is to identify and close technology gaps, which includes the development and integration of the electronics industry supply infrastructure. This industry-led consortium is made up of approximately 70 manufacturers, suppliers, industry associations and consortia, government agencies and universities. iNEMI roadmaps the needs of the electronics industry, identifies gaps in the technology infrastructure, establishes implementation projects to eliminate these gaps (both business and technical), and stimulates standards activities to speed the introduction of new technologies. The consortium also works with government agencies, universities and other funding agencies to set priorities for future industry needs and R&D initiatives. iNEMI is based in Herndon, Va., with a representative office in Shanghai, China. For additional information about iNEMI, visit http://www.inemi.org/.