-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
IPC APEX EXPO 2023 Special Session: Advanced Packaging
March 13, 2023 | Pete Starkey, I-Connect007Estimated reading time: 2 minutes
The IPC APEX EXPO Special Session on Advanced Packaging this year attracted enormous interest, with Conference Room 2 at capacity long before the session began. Even with lots of extra seats squeezed around the edges, the session was standing room only for the just-in-time arrivals.
IPC Chief Technology Officer Matt Kelly opened proceedings by introducing a distinguished panel of experts: Jan Vardaman, president and founder of TechSearch International; Sam Salama, CEO of Hyperion Technology; Matt Neely, director of process engineering at TTM Technologies; and Jim Fuller, VP of engineering technology at Sanmina.
In his opening remarks, Kelly reflected upon the changes happening in semiconductor technology, which he believes will noticeably disrupt the industry over the next five to seven years. The declaration “Advanced packaging is the new king!” was attributed to Todd Younkin, president of Semiconductor Research Corporation, speaking at IPC’s Advanced Packaging Symposium [in Washington, D.C.]. According to panelists, “Everything follows silicon” is now a cardinal rule, as global and regional supply-chain shifts advance at different rates in North America, Europe, and Asia. Unfortunately, North America is lagging well behind and urgently needs to catch up to other regions.
Japan leads the way in substrate capability and capacity, followed by South Korea and Taiwan; China is well positioned to support multiple substrate technologies, but North America has minimal capability for flip-chip ball grid array substrates and none for wire-bond integrated circuit substrates.
“We have a lot of work to do,” Kelly said. His call to action stressed that while North America and Europe are talking about these issues, Asia is actually doing something about them, further widening the gap between Asia and the West. Focusing only on silicon, he said, will extend the supply chain rather than shorten it. Substrates and packaging assembly are critical, and the U.S. lacks both build-up substrate capability and package assembly capacity. Overcoming these business and technology issues will require a significant change of mindset.
Kelly highlighted IPC’s commitment to both help build an advanced packaging ecosystem and adopt a “silicon to systems” approach that preserves the importance of the solder joint on the advanced assembly.
Kelly then handed the mic over to Vardaman, who explored the future needs of the IC substrate ecosystem: “Semiconductor fabs are a necessary but not sufficient solution,” she told the group. “A package acts as the interface or intermediary between the chip and the board. You can make all the silicon chips you want, but if you can’t package them, they don’t do you much good. If you don’t invest in the packaging infrastructure in North America, what’s the point of making the chips here if you just send them overseas for assembly?” Echoing Kelly’s earlier message, Vardaman reminded us that such a short-sighted approach will create more problems than it solves: “You have not solved the problem—you’ve lengthened the supply chain instead of shortening it.”
To read this entire article, which appeared in the 2023 edition of Show & Tell Magazine, click here.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.