-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
DFM 101: Final Finishes ImmSn
December 29, 2022 | Anaya Vardya, American Standard CircuitsEstimated reading time: 1 minute
Introduction
One of the biggest challenges facing PCB designers is understanding the many cost drivers in the PCB manufacturing process. This article is the latest in a series that will discuss these cost drivers (from the PCB manufacturer’s perspective) and the design decisions that will impact product reliability.
Final Finishes
The primary purpose of a final finish is to create electrical and thermal continuity with a surface of the PCB. Final finishes provide a surface for the component assembler to either solder, wire bond, or conductively attach a component pad or lead to a pad, hole, or area of a PCB. Another use for final finishes is to provide a known contact resistance and life cycle for connectors, keys, or switches.
There are a number of final finishes in use in the industry today, including:
- ENIG (electroless nickel, immersion gold)
- ENIPIG (electroless nickel, immersion palladium, immersion gold)
- ENEPIG (electroless nickel, electroless palladium, immersion gold)
- ImmAg (immersion silver)
- ImmSn (immersion tin)
- Sulfamate nickel/hard or soft gold (electrolytic nickel/gold)
- HASL (hot air solder leveling)
- SnPb (63/37 tin/lead)
- LF (lead-free)
- OSP (organic solderability preservative)
Final finishes are primarily application driven, so there are a number of considerations that should be part of any decision to choose a final finish:
- Lead (Pb) tolerant or lead-free (LF) process
- Shelf life
- Flatness
- Lead or ball pitch
- Wire bondability
- Lead insertion
- Solder joint integrity
- Corrosion resistance
- Potential problems
- Cost
Lead-free finishes are considered RoHS-compliant (< 0.1% BW of finish, for Pb, Hg or Cd) with the single exception of tin/lead HASL. The RoHS-compliant finishes include the following:
- ENIG
- ENIPIG
- ENEPIG
- ImmAg
- ImmSn
- Electrolytic nickel/gold
- LF HASL
- OSP
Lead-free PCBs require that the standard HASL surface finish cannot be used. There is still a significant amount of discussion on what the long-term surface finishes will be. Currently, the immersion silver and OSP surface finishes are the most prevalently specified surface finishes for solderable PCBs. Immersion tin is the prevalent surface finish for press-fit backplanes. Please contact your PCB fabricator for current information on where industry specifications are heading.
To read this entire article, which appeared in the November 2022 issue of Design007 Magazine, click here.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.