Electronics vs. Physics: Why Vias Don’t Get Hot
December 6, 2022 | Douglas Brooks, Consultant, and Johannes Adam, ADAM ResearchEstimated reading time: 1 minute
Most of are aware that when we pass an electrical current through a trace (conductor), the trace will heat up. This temperature increase is caused by the I2R power loss dissipated in the resistance of the trace. The resistance of a copper trace is mostly determined by its geometry (cross-sectional area), and there are lots of studies trying to look at the relationship between the current down a trace (of known size) and the resulting temperature of the trace.
But the situation is much more complicated than this. There are physical properties that exist that result in helping to cool the trace. These properties are usually a combination of conduction of the heat away from the trace through the material, convection of the heat away from the trace through the air, and radiation of the heat away from the trace. A stable temperature is reached when the I2R heating equals the cooling—i.e., when the electronic and physical properties are balanced.
We have spent several (enjoyable) years collaborating on these effects. Douglas is an electrical engineer and understands electronics. Johannes is a thermodynamics physicist, and understands heat transfer. Between us we learned a lot about the thermal characteristics of vias.
Vias Don’t Get Very Hot
Traces heat because of the current through their resistance, resulting in I2R power losses. This temperature increase is caused by what we call “Joule heating”:
Joule heating is the physical effect by which the pass(age) of current through an electrical conductor produces thermal energy. This thermal energy is then evidenced through a rise in the conductor material temperature, thus the term “heating.” One can see Joule heating as a transformation between “electrical energy” and “thermal energy,” following the energy conservation principle.
We are all aware that, in general, for a given trace an increase in current through the trace will correspond to an increase in temperature of the trace. When it comes to vias, the industry guidelines have generally been to size the cross-sectional area of a via to equal that of its parent trace. Then the via will be the same temperature as the trace.
To read this entire article, which appeared in the November 2022 issue of Design007 Magazine, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.