DownStream Flexes in Rigid-Flex

Reading time ( words)

During PCB West, I caught up with DownStream Technologies co-founder Joe Clark and Senior Product Marketing Manager Mark Gallant. We discussed some of their latest tool updates, including a greater focus on bringing post-processing functionality, such as inter-layer analysis capability, to rigid-flex circuits. Joe also offered a look at global design trends going into 2023, as more engineers take on PCB designer roles while senior designers are retiring.

Andy Shaughnessy: Joe, give us an update on what’s been going on with DownStream for the last year.

Joe Clark: Last year was a record year for us, where we experienced over 10% growth even in the middle of COVID. We’re on track to repeat that again in 2022. Much of that is driven by our major customers adopting design-for-manufacturing and intelligent design formats. A lot of the analysis that used to be done at the end of the design process has been moving “upstream,” and that has implications on the tool capabilities, i.e., it’s got to be easy to use and have low cost of ownership. It’s hard to believe that we’ve been doing this for 20 years.

Shaughnessy: Who knew 2002 was a great time to start a company?

Clark: It was actually the worst time to start a company. But our vision was that design-for-manufacturing analysis would become a mainstream mission-critical requirement, and that the analysis would naturally move upstream. If you remember back when we were PADS, we acquired HyperLynx because our belief was that designers should be doing signal integrity checks during the design creation cycle, not at the end; we were right. We then spun out of Innoveda, took the CAM350 product with us, and added DFM analysis capabilities along with support for intelligent formats (ODB++, IPC-2581) to support in-cycle DFM analysis. We were right again.

Also, as we worked with customers, it became clear to us that another mission-critical part of the process not being addressed was the designers’ need to create detailed documentation for their PCB designs. At the time, they all used their CAD tools, but they were not created to do documentation. PCB documentation is not a “nice to do” thing; it is a necessary thing to do as part of a good new-product design process. Working with customers, and again taking advantage of the shift to neutral intelligent design formats, we developed BluePrint to address the needs for creating quality, adaptable PCB documentation.

Shaughnessy: Most designers love doing layout, but they hate post-processing and documentation creation.

Clark: They hated doing it, especially documentation, in large part due to the nature of the existing tools. They were simply too difficult to use in the design cycle. We focused on providing tools of high functionality combined with ease of use. For PCB documentation, we developed a tool to automate it, to leverage the intelligence of the design to allow users to create, in a very automated way, comprehensive PCB documentation to their particular requirements. Believe me when I say that PCB doc requirements vary greatly company to company and often even division to division. Our BluePrint tool is fully customizable.

Shaughnessy: What is your focus as we head into 2023?

Clark: There are new trends coming, and our most recent focus is on rigid-flex. Working with companies like Microsoft, we realized that there are really no tools to address a host of new challenges: multiple stackup regions, the potential problems from bending a circuit, inter-layer dependencies, and other such technological obstacles.

To read this entire conversation, which appeared in the November 2022 issue of Design007 Magazine, click here.


Suggested Items

Runner-up Discusses IPC Design Competition

03/16/2023 | I-Connect007 Editorial Team
PCB designer Adam Thorvaldson of Innovex was a finalist in this year’s IPC Design Competition at IPC APEX EXPO. He came in second place in this final heat, which is quite a feat, considering that the contest started last fall with 49 contestants from around the globe. We asked Adam to share his thoughts on the competition, what it means to be one of the winners, and any ideas about improving the contest for 2024 in Anaheim.

Shrinking Silicon, Growing Signal Integrity Challenges

03/09/2023 | I-Connect007 Editorial Team
What happens when die sizes shrink? As IPC design instructor Kris Moyer explains, quite a bit. Shrinking silicon can mean rising signal speed and rise times, and traditional PCB designers may find themselves dealing with problems formerly only seen by RF engineers. We asked Kris to discuss the pros and cons of silicon shrinkage and some of the techniques and trade-offs that PCB designers and design engineers need to understand as they find themselves entering the RF arena.

Meet Henry Crandall: New IPC Student Board Member

03/05/2023 | Barry Matties, I-Connect007
Barry Matties sits down with Henry Crandall, the newly minted Student Board Member on the IPC Board of Directors, to talk about how Henry became the first PhD student in electrical engineering in his family, as well as how his role on the IPC Board will allow him to represent the voices of students and young professionals interested in shaping the future of both IPC and the industry.

Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.