October 2022 Issue of Design007 Available Now


Reading time ( words)

It's tough to get much smaller than ultra HDI. This is a whole new level of miniaturization for most PCB designers and fabricators. UHDI folks speak in terms of microns, not mils. And everything changes when you start working with 15-micron lines and spaces. 

So, in the October issue of Design007 Magazine, we asked some of the top UHDI experts to share their knowledge about designing and fabricating these tiny features. Join us as we journey to UHDI and beyond!

Download your PDF copy for future reference. Sign up for delivery in your e-mailbox by subscribing here

Share




Suggested Items

EMA Helps Ease Designers’ Supply Chain Woes

10/20/2022 | Andy Shaughnessy, Design007 Magazine
Supply chain issues are continuing to cause disruptions in our industry, though lead times have dropped from astronomical to merely troublesome. In this interview, Chris Banton, EMA Design Automation’s director of marketing, explains how Cadence’s software has evolved as designers’ needs have changed in the past few turbulent years, including providing designers with component availability data early in the process.

September 2022 Issue of Design007 Magazine Available Now

09/09/2022 | I-Connect007 Editorial Team
Supply chain management is a dynamic situation, with a number of global forces that can create pain for PCB designers. In this issue, we speak with a variety of experts and bring you up-to-the-minute insight about designing PCBs in this ever-changing environment.

Designing for Material Conservation Means Changing Attitudes

08/29/2022 | I-Connect007 Editorial Team
It makes a lot of sense: During times when the supply chain is stretched to the breaking point—and the last few years certainly qualify—what if PCB designers created boards that used fewer components and less laminate? Do PCBs still have to be 0.062" thick? Why not reduce layer count while they’re at it? Andy Shaughnessy and Nolan Johnson spoke with I-Connect007 columnist Dana Korf about the idea of designing a PCB with material conservation in mind. Is it a great new idea, or are we opening a whole new can of worms and a separate group of problems?



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.