Electronics Industry Calls for U.S. Presidential Determination on Key Components Under Defense Production Act


Reading time ( words)

The electronics industry is calling on U.S. President Joe Biden to address urgent industrial base vulnerabilities and deliver on the promise of the CHIPS Act by prioritizing domestic development of printed circuit boards (PCBs) and integrated circuit (IC) substrates under Title III of the Defense Production Act. 

Three industry groups – IPC, the U.S. Partnership for Assured Electronics (USPAE), and the Printed Circuit Board Association of America (PCBAA) – delivered a letter to President Biden, calling on him to issue a presidential determination on the matter.

“For more than 20 years,” the letter states, “experts in and out of government have warned that the erosion of U.S. PCB capabilities and capacity would compromise national and economic security. These warnings have proven all too accurate, as today, the U.S. share of global PCB production has fallen from 30 percent to 4 percent, making the nation precariously reliant on a global supply chain that is itself in turmoil.”

The Biden administration’s year-long assessment of the information and communications technology (ICT) supply chain highlighted the critical importance of PCB fabrication and assembly in electronics manufacturing and recommended that government programs like Title III be used to bolster the strength of U.S. PCB manufacturers.   

Supporting the entire electronics ecosystem is also “critically important to the implementation of the CHIPS Act,” the letter continues. “Presently, there are no U.S. manufacturers that can produce the volume of IC substrates needed to support defense and commercial needs.”  

Increasing domestic chips production without bolstering regional development and manufacture of cutting-edge PCBs and IC substrates risks lengthening and slowing the semiconductor supply chain, because many of the chips made in Arizona or Ohio will need to be sent to other countries for component packaging and assembly into finished products.

“A presidential determination on PCBs and IC substrates would be a key step toward rebuilding the U.S. electronics manufacturing industry,” Mitchell added. “The Executive Branch and Congress must continue to support – through long-term policy and funding – the entire ecosystem that drives and sustains innovative, resilient, and secure electronics manufacturing.”  

For more information, visit www.IPC.org.

About IPC

IPC (www.IPC.org) is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3,000+ member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly, test and advanced packaging. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Atlanta, Georgia; Washington, D.C.; Munich, Germany; Brussels, Belgium; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.

Share




Suggested Items

EIPC Technical Snapshot: Novel Laser-based Manufacturing Processes in Automotive Electronics

09/22/2022 | Pete Starkey, I-Connect007
“Summer is over, now it's back to work!” This was the opening line of the invitation to the 18th EIPC Technical Snapshot webinar, Sept. 14, following the theme of advances in automotive electronics technology, introduced and moderated by EIPC President Alun Morgan. The first presentation, entitled "The fully printed smart component—combining additive manufacturing and sensor printing," came from Jonas Mertin, a thin-film processing specialist at the Fraunhofer Institute for Laser Technology.

Review: Institute of Circuit Technology 2022 Annual Symposium

06/15/2022 | Pete Starkey, I-Connect007
The British Motor Museum in Warwickshire, housing the world's largest collection of historic British cars, was venue for the 2022 Annual Symposium of the Institute of Circuit Technology on June 8, which attracted a substantial gathering of manufacturers and suppliers from the UK printed circuit industry. ICT chair Emma Hudson reflected upon lessons learned during the pandemic lock-down and how the industry has successfully adapted to circumstances. She commented that the UK’s PCB fabricators are extremely busy, as she introduced an outstanding conference programme including a keynote from the incomparable Happy Holden.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

05/20/2022 | Andy Shaughnessy, I-Connect007
This week, we bring you an article about manufacturing training for veterans, and a review of a great signal integrity webinar. IPC honors its A-Teams with the coveted Golden Gnome Awards, and Technica discusses various ways for fabricators to increase ROI. Dan Beaulieu has a review of a really cool book: Back to Human—How Great Leaders Create Connection in the Age of Isolation. In spite of all the meetings on Teams and Zoom, it’s easy to feel disconnected. But great leaders find a way to foster that connectivity.



Copyright © 2022 I-Connect007. All rights reserved.