Cadence’s Dr. Anirudh Devgan to be Honored with 2021 Phil Kaufman Award on May 12


Reading time ( words)

Dr. Anirudh Devgan, President and CEO of Cadence Design Systems, will be honored with the 2021 Phil Kaufman Award for Distinguished Contributions to Electronic System Design at an award ceremony and banquet Thursday, May 12.

Hosted by the Electronic System Design Alliance (ESD Alliance) and the IEEE Council on Electronic Design Automation (CEDA), the celebration will be held from 6:30 p.m. until 9:30 p.m. at The GlassHouse, 2 South Market Street in San Jose, Calif.

Early bird pricing for tickets is available through Friday, April 8, at $175 per individual from member companies and $225 each for non-members. Member tickets after April 8 are $225 each and $275 per non-member. Member pricing is offered for individuals in companies that are active SEMI members or active IEEE members.

Download The System Designer’s Guide to… System Analysis by Brad Griffin. You can also view other titles in our full I-007e Book library here. 

Share




Suggested Items

A New Sourcing Paradigm

09/20/2022 | I-Connect007 Editorial Team
We’ve seen many changes over the past few years, and nowhere are they more evident than in the world of sourcing components. Sourcing has become one of the biggest challenges facing PCB designers and design engineers today. Gone are the days of procuring parts from a single source, and communication between stakeholders and distributors is critical. But as we learned in a conversation with I-Connect007 columnist Kelly Dack, PCB designers can use certain layout strategies to plan for the unexpected, such as leaving extra real estate so that smaller components can be replaced by larger, readily available parts if the originals become “unobtainium.”

Happy’s Design Tips for Material Conservation

08/25/2022 | Happy Holden, I-Connect007
For this issue, Happy Holden provided a range of options for designers who are seeking to conserve materials in their next design. He also offered an example of the relative cost index, or RCI, that he developed at HP exclusively for PCB design. With this RCI, designers can figure out the relative cost of a new design compared to an eight-layer through-hole board. We hope you can use this handy formula on your next design job.

Cadence Provides ‘Clarity’ in Design Tool

08/11/2022 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Brad Griffin, product marketing director for Cadence Design Systems, about Cadence’s Matrix solver technology. They discuss its use as a multi-disciplinary field solver as well as Cadence’s focus on thermal analysis and utilizing the power of the cloud.



Copyright © 2022 I-Connect007. All rights reserved.