Reading time ( words)
There are more avenues for acquiring design education and training than ever before—live classes, online webinars, YouTube videos and blogs, but where should you start? We asked this month’s contributors to share their advice for setting up a PCB design education and training plan that can take young PCB designers and design engineers through their entire careers.
Find out more in the March issue of Design007 Magazine. Download your copy today on the virtual newsstand or subscribe here for delivery in your email inbox.
I-Connect007 Editorial Team
We’ve seen many changes over the past few years, and nowhere are they more evident than in the world of sourcing components. Sourcing has become one of the biggest challenges facing PCB designers and design engineers today. Gone are the days of procuring parts from a single source, and communication between stakeholders and distributors is critical. But as we learned in a conversation with I-Connect007 columnist Kelly Dack, PCB designers can use certain layout strategies to plan for the unexpected, such as leaving extra real estate so that smaller components can be replaced by larger, readily available parts if the originals become “unobtainium.”
Happy Holden, I-Connect007
For this issue, Happy Holden provided a range of options for designers who are seeking to conserve materials in their next design. He also offered an example of the relative cost index, or RCI, that he developed at HP exclusively for PCB design. With this RCI, designers can figure out the relative cost of a new design compared to an eight-layer through-hole board. We hope you can use this handy formula on your next design job.
Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Brad Griffin, product marketing director for Cadence Design Systems, about Cadence’s Matrix solver technology. They discuss its use as a multi-disciplinary field solver as well as Cadence’s focus on thermal analysis and utilizing the power of the cloud.