Kris Moyer Discusses New IPC Design Role

Reading time ( words)

The I-Connect007 Editorial Team spoke with Kris Moyer, a longtime PCB designer who has just joined IPC’s Education Foundation. Kris was one of the judges and creators of the IPC Design competition that culminated at IPC APEX EXPO, and he was eager to discuss his new job and the cutting-edge technology he’s seen lately, including additive, flex, and rigid-flex circuits. 

Barry Matties: Kris, what’s your role at the IPC?

Kris Moyer: I’m on the Education Foundation. I’m actually the instructor who teaches all the printed circuit board design courses at IPC.

Matties: Fantastic. And when you’re teaching the design courses, who are your students typically?

Moyer: Typically, it’s all levels of professionals already in industry. Everywhere I’ve had students who are fresh out of college who got a job, and they said, “Hey, you need to learn this, go take it,” to folks who have been in the industry to 30 or 40 years and want to expand their knowledge. Basically, it’s for anybody in the industry who’s working on printed circuit board design and wants to expand their knowledge based off the IPC standards, or just other aspects of board design they might not have been exposed to.

Matties: Well, doing your program, you’re learning what the latest trends and demands are for designers.

Moyer: Latest trends, demands, and the latest and greatest IPC standards. It’s the latest revision of all the IPC standards, so you’re up to date with the latest requirements, standards, methodologies, and so on.

Matties: Why did you join the IPC? What was the appeal here? Why is the IPC so important to the design community?

Moyer: I’ll start with the first question. I’ve been an evening instructor at Sacramento State University, and I recognized the need several years ago to train the next generation of board designers. We weren’t seeing a lot of that. We saw folks who were experienced and starting to retire out, but there weren’t a lot of people wanting to go into that career. So, I created a course for my university to teach some board design. I was speaking with IPC about that, and they were very interested. They worked with me, we came to an agreement, and I developed the courses for IPC to teach at the professional level. I’ve been doing that for several years now, and they decided to bring me on full time to develop additional courses.

Matties: One of the things that we’re hearing out there in the world is that additive manufacturing is creating a challenge for designers. How are we going to overcome that?

Moyer: Part of it will be with courses like mine that teach how to design with the additive manufacturing processes, while others are just added as that technology gains acceptance and use out in the industry. It will just become heritage knowledge through fabricators, through assembly houses, and so on; it will then be able to convey that information back and forth more efficiently to fabricators just like we do now with traditional boards.

Matties: Are the designers coming to you and saying they want to learn this, or are you going to the designer and saying that you offer this kind of training?

Moyer: Both. The courses I’ve developed were partly based on feedback. I started with a two-part fundamentals course on the basics of design. The feedback from that, along with my own experience in the industry, said, “These are the areas where we need to add focus on advanced topics.”

Matties: What is the hottest topic that the designers are asking for more education on right now?

Moyer: Right now, military aerospace is extremely high in demand, and flexible and rigid-flex printed circuit design is highly in the demand. And then there’s one that I call advanced packaging, which is not quite the semi-additive yet, but it’s the one dealing with microvias and sequential amination. We’re getting to the finer pitch without quite getting to the additive process yet.

To read this entire conversation, which appeared in the February 2022 issue of Design007 Magazine, click here.


Suggested Items

Tips and Tricks in Today’s Designs

03/23/2023 | Kelly Dack, CID+
Filbert Arzola of Raytheon Intelligence & Space taught a Professional Development course at IPC APEX EXPO on general design practices. During a break, Filbert spoke with Kelly Dack about some of today’s design strategies and how designers are reacting to them. What matters most?

Are You Offering Options in Your Bill of Materials?

03/07/2023 | I-Connect007 Editorial Team
In this interview, Saline Lectronics (an Emerald EMS company) President Jason Sciberras talks about PCB designers offering packaging options in the bill of materials. As Jason explains, mil/aero manufacturers like Saline can’t make many changes to a design without getting recertified, so including approved packaging options in the BOM from the start is a great way to go. Are you offering options in your BOM?

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/20/2023 | Andy Shaughnessy, Design007 Magazine
We’re in the middle of show season, and it certainly “shows.” Thank you very much. I’m here all week. Don’t forget to tip your wait staff. This week, we published a variety of articles, columns, and news items, and much of it centered on trade shows. Technical Editor Dan Feinberg brings us a report from CES 2023. IPC announced the winners of the Best Technical Paper awards for IPC APEX EXPO 2023. And we have an interview with Altium’s Rea Callender about the company’s educational efforts at APEX and around the globe.

Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.