IPC to Hold Training Course on PCB Design for Mil/Aero Applications


Reading time ( words)

IPC will be holding a training course on PCB design for military and aerospace applications. Scheduled every Monday and Wednesday from August 30 to October 6, 2021, the course addresses specific challenges encountered in military and aerospace applications, including the effects of vibration, shock, radiation, and altitude, extended operating temperature range, and other design considerations for high reliability applications.

The class also focuses on the impact of these designs on manufacturing and assembly techniques, documentation, and manufacturing file generation.

Taught by an IPC-certified industry expert with more than 25 years of experience in the field, the eight-week program utilizes interactive webinars, on-demand recorded class sessions, job-specific exercises, and team projects to facilitate mastery of the key concepts required to design boards for military and aerospace applications.

Learn more: PCB Design for Military & Aerospace Applications

Share




Suggested Items

A New Sourcing Paradigm

09/20/2022 | I-Connect007 Editorial Team
We’ve seen many changes over the past few years, and nowhere are they more evident than in the world of sourcing components. Sourcing has become one of the biggest challenges facing PCB designers and design engineers today. Gone are the days of procuring parts from a single source, and communication between stakeholders and distributors is critical. But as we learned in a conversation with I-Connect007 columnist Kelly Dack, PCB designers can use certain layout strategies to plan for the unexpected, such as leaving extra real estate so that smaller components can be replaced by larger, readily available parts if the originals become “unobtainium.”

Happy’s Design Tips for Material Conservation

08/25/2022 | Happy Holden, I-Connect007
For this issue, Happy Holden provided a range of options for designers who are seeking to conserve materials in their next design. He also offered an example of the relative cost index, or RCI, that he developed at HP exclusively for PCB design. With this RCI, designers can figure out the relative cost of a new design compared to an eight-layer through-hole board. We hope you can use this handy formula on your next design job.

Cadence Provides ‘Clarity’ in Design Tool

08/11/2022 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Brad Griffin, product marketing director for Cadence Design Systems, about Cadence’s Matrix solver technology. They discuss its use as a multi-disciplinary field solver as well as Cadence’s focus on thermal analysis and utilizing the power of the cloud.



Copyright © 2022 I-Connect007. All rights reserved.