-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Benchmarking Your Process Engineering
April 29, 2021 | I-Connect007 Editorial TeamEstimated reading time: 4 minutes
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design.
In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.
Barry Matties: Mark, now that you’re a PCB designer, after decades in fabrication, what is the most surprising thing you’ve learned?
Mark Thompson: Oh, gosh, there are a number of them. For years I preached things like, “Don’t design at minimums due to etch compensations based on copper weights.” But now I find myself living that because I’m running out of space. I’m designing it 4/4 and then thinking, “Well, gosh, if I do that, now I’m going to have to etch compensate it on half-ounce copper, and it’s going to be four and a half and three and a half, which means they’re going to be relegated to three-eighth ounce copper foils.” And that might be a problem for power functions. It might be a problem for the part itself, and it may not live with that. So that’s one of the things I’ve learned.
I’ve also learned a lot about component placement and footprint design. We’ve talked about footprints before and how critical it is to get your footprints right. And truthfully, the footprints themselves are pretty much the same. What changes is the courtyard, the distance around the component that you’re actually putting on the board, and that distance is dictating how much space you have. There could be a tall part, and you might need to have a human, have a finger go inside there and actually reach in and hand solder something in on a very tall part. So that becomes an issue, and that’s one of the other things that I’ve learned.
In fact, it’s almost like I blanked out my 25 years at Prototron and 30+ years in PCB manufacturing when I started designing. I have to completely rethink the game and deal with a whole lot more variables. Designing is certainly not point-to-point connecting the nets. It is so much more than that. It’s understanding those nets; it’s understanding power. What’s the very first thing I look at when I’m looking at a board? I’m looking at power functions. I ask questions about mechanicals. When we do a kickoff call with a customer, the very first thing I say is, “What sort of mechanical considerations do you have?”
In conjunction with that, there are also power functions. If they have considerations for high-current power, then I’ve got to make sure that the trace width is going to be large enough. I’ll use a site like Saturn and I’ll pre-calculate how wide that trace needs to be, and then I’ll be able to preplan things. In fact, that’s one of the things that I’ve learned here recently, very intimately: When I’m placing parts, I allow myself enough space to drop vias to be able to do interconnects. Because if it’s a six-layer board and I don’t have very much room on the outer layers based on the part geometries and the available space, I’m going to have to drop down to an internal layer. And by doing that, it means I’m going to have to have a via. I have to account for that via width and that pad size associated with that via all the way down through the stack. I’m also dealing with pouring polygons. That’s a big one.
Matties: Right. Is there anything that you used to preach out there that you would now say, “Hold it, I’ve rethought this now that I’m on this end, and let’s do it this way?”
Thompson: I’ll give you an example of that. As a manufacturer, you want things looking nice and clean. If they’ve got metal at the edge, you’re going to try to clip it back. Where do you not clip it back? You don’t clip it back on an RF launch, a coplanar waveguide type structure that goes right to the edge of the board and needs to go right to the Z-axis edge of that particular board, and it has to stay that way.
Matties: That’s interesting. Thank you for sharing that. With your fabrication background, you’re in a really unique position as a PCB designer.
Thompson: I am. I can’t tell you how many conversations I’ve had with the designers here at Monsoon about fabrication-related issues. Frequently they’ll ask me what the minimum hole size with a particular pad size is. And they’re very simple questions, but they’re very helpful if you don’t know the answer.
To read this entire interview, which appeared in the April 2021 issue of PCB007 Magazine, click here.
Suggested Items
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.