-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Issues Call for Participation for IPC APEX EXPO 2022
April 8, 2021 | IPCEstimated reading time: 1 minute
IPC invites engineers, researchers, academics, technical experts and industry leaders to submit abstracts for IPC APEX EXPO 2022 to be held at the San Diego Convention Center. Professional development courses will take place January 23, 24 and 27, 2022 and the technical conference will take place January 25–27, 2022.
The industry’s premier conference and exhibition for the electronics industry, IPC APEX EXPO provides presenters and their companies with a notable and cost-effective opportunity to promote their expertise and gain visibility with key engineers, managers and executives from all segments of the industry worldwide. To recognize exceptional achievement, awards will be presented for “Best Paper."
Expert papers and presentations are being sought in the following areas: factory of the future implementation; circuit design and component technologies; quality, reliability, test and inspection; enabling future technologies; meeting extreme environments; electronics materials; conscientious engineering; assembly processes; and PCB fabrication and materials. For specific topics under each area, visit www.ipcapexexpo.org/CFP.
An approximate 300-word technical conference abstract summarizing original and previously unpublished work covering case histories, research and discoveries must be submitted. The submission should describe significant results from experiments and case studies, emphasize new techniques, discuss trends of interest and contain appropriate technical test results.
In addition, course proposals are solicited from individuals interested in presenting half-day (three-hour) professional development courses on design, manufacturing processes and materials.
Technical conference paper abstracts are due June 18, 2021. Professional development course proposals are due July 16, 2021. To submit an abstract or course proposal, visit www.IPCAPEXEXPO.org/CFP.
Suggested Items
The New Chapter: Attracting ‘Generation Green’
03/28/2024 | Hannah Grace & Paige Fiet -- Column: The New ChapterIn the electronics industry, we talk a lot about sustainability in terms of recruitment and retention of the next generation of engineers. But what if the key to sustaining the industry long into the future is through the more common definition of the word? What if, for just a moment, we think about sustainability in terms of the environment and what we as an industry are doing to care for it? Because, if you weren’t aware, Gen Z cares tremendously about the environment and the actions companies are taking to preserve it. Without Gen Z joining the electronics industry’s workforce, we won’t be able to sustain the industry for much longer.
Accenture Invests in Sanctuary AI to Bring AI-Powered, Humanoid Robotics to Work Alongside Humans
03/27/2024 | BUSINESS WIREAccenture has made a strategic investment, through Accenture Ventures, in Sanctuary AI, a developer of humanoid general-purpose robots that are powered by AI and can perform a wide variety of work tasks quickly, safely and effectively.
Don Dennison Appointed to Roll Out KIC’s Latest Thermal Analysis System Software in the Northeast
03/26/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is pleased to announce the appointment of PIT Equipment Services, LLC, led by Don Dennison, as its representative for New York, New Jersey, and Eastern Pennsylvania.
iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs
03/25/2024 | IPCToday’s system solutions combine more varied functionality, such as digital, analog, optical, micro-mechanical, etc., packed into smaller form factors. As a result, electronics manufacturing has to deliver increasingly complex integration of diverse technologies with system designs that blur the distinction between chip, package, board, and assembly.
Seeking Employment: Meet Gary Turner
03/25/2024 | Barry Matties, I-Connect007Meet Gary Turner, a recent graduate from the University of Texas at Dallas with a bachelor’s degree in mechanical engineering and a master’s in material science and engineering. He is currently seeking employment in the industry. The following interview will allow you to learn about Gary and see if he might be a good candidate for a position you are looking to fill.