-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Chapter 1 Excerpt: The Printed Circuit Assembler’s Guide to Process Validation
December 31, 2020 | Graham Naisbitt, Gen3 SystemsEstimated reading time: 2 minutes
Quick and Convenient Contamination Testing
The original principle underlying the IPC’s ionic cleanliness requirement was that the mobility of surface ions, detectable from SIR measurements, would correlate to a maximum value of detectable ionic elements permissible on the circuit surface.
The industry required a test that was both fast and accurate for process control. Thus, a simplified ion chromatograph that was able to detect ionic elements without differentiation was created. Due to patent restrictions, there were—and still are—only two different instrument configurations: closed-loop and open-loop, which became referred to as static and dynamic instruments. Each instrument configuration must be capable of measuring the presence of a known amount of ionic contamination.
Based on an extrapolation of insulation resistance measurements, it was determined that there was an upper limit beyond which ionic elements would become mobile on the assembly surface, thereby potentially compromising electrochemical reliability. The number, although occasionally altered during the infancy of this test, was 1.56 µg/cm² NaCl equivalence. Despite the many technology changes employed in the period after the mid-1970s, many—if not most—felt it convenient to simply continue applying this rule as adequate evidence of the electrochemical reliability of their end-product.
The IPC has now withdrawn the requirement for 1.56 µg/cm² NaCl equivalence for a number of reasons as explained in IPC-WP-019A, which states, “For many years, military (e.g., MIL-STD-2000) and commercial (e.g., IPC-J-STD-001) manufacturing standards have required manufactured circuit card assemblies (CCAs) to meet an ionic cleanliness requirement of 1.56 microgram (µg) of sodium chloride (NaCl) equivalence per square centimetre (cm2) of extracted surface, using resistivity of solvent extract (ROSE) testing per IPC-TM-650, method 2.3.25.”
Therefore, it is the position of the IPC committees that the value of 1.56 µg NaCl equivalence per square centimetre should be considered as obsolete for the following seven reasons:
- This test methodology was originally developed in the 1970s. It was never intended to be used as a cleanliness test, nor as a test for product acceptability; it was only intended to be used as a process control method.
- The use of the ionic contamination value as a measure of product acceptance was the result of a U.S. Department of Defense desire to implement pass/fail criteria.
- This ionic contamination value, and those derived from them, were originally developed for high solids (35% solids) rosin fluxes and ozone-depleting chemical (ODC) cleaning. The flux chemistries and cleaning solutions used today are completely different from those used when the ROSE limits were established.
- Modern assemblies are simply too complex in terms of residues to have a single “one-size-fits-all” cleanliness criterion.
- There is mounting evidence that as CCA component density increases, so does the sensitivity of the circuit to ionic contamination. Modern circuit assemblies have far greater component densities than found in the 1970s. This also means that residues that had minimal impact on component technologies from the 1970s can now have a significant impact on component reliability.
- For many assemblies, ROSE testing is no longer a sufficient test regimen to adequately predict acceptable levels of ionic residues. IPC has compiled a list of technical presentations showing the inadequacy of ROSE to predict ionic residues for high-performance electronics.
- It is recognized that ionic residue testing is critical for reliable circuit function, so the ROSE test has continued in use until a more suitable alternative can be identified and implemented.
To download The Printed Circuit Assembler’s Guide to Process Validation, click here. You can also view other titles in our full library.
To view the Gen3 roundtable on the PICT standard, click here.
Suggested Items
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPC APEX EXPOBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.
What’s Next Becomes Now at IPC APEX EXPO 2024
04/22/2024 | IPCFrom revolutionary advancements in artificial intelligence, augmented reality and the latest innovations in capital equipment on the show floor to a heightened learner experience through the 16th Electronic Circuits World Convention (ECWC16) technical conference, IPC APEX EXPO 2024 provided education, professional development and numerous networking opportunities, for 3,723 attendees from 57 countries.
Real Time with... IPC APEX EXPO 2024: Looking Back, Looking Forward With IEC
04/19/2024 | Real Time with...IPC APEX EXPOIEC came to the RTW booth and discussed both the legacy of IEC's past and the vision for its future. Industry veteran Bruno Ferri highlighted his quarter-century tenure in the industry and with IEC since its founding. He still exhibits boundless enthusiasm for the industry. Brando Stone, a young professional and a future face of IEC, talked about IEC's plans going forward and his experience at this year's IPC APEX EXPO.