Real Time with… AltiumLive 2020: Early Communication Key to Success of OSV Project



Rob Cooke, director of engineering at Calumet Electronics, discusses his role in the Open Source Ventilator (OSV) project that yielded ventilator PCBs in record time. He and project partners Dugan Karnazes of Velocity Research and Chris Denney of Worthington Assembly recounted this story during a panel at the virtual AltiumLive. Rob explains why early communication with Dugan while the PCB design process was still ongoing was vital to the success of the project, and he points out some of the takeaways for engineers working on similar time-sensitive projects in the future.

Visit Real Time with… AltiumLive 2020 to catch the latest video interviews and event-related content.

Share




Suggested Items

Designing in a Vacuum Q&A: Mark Thompson

05/12/2022 | Andy Shaughnessy, Design007 Magazine
I-Connect007 Columnist Mark Thompson of Out of the Box Manufacturing has been in CAM engineering for decades, and he’s also worked as a PCB designer, so we knew he would have a few things to say about working in a vacuum. As he explains, the designer isn’t the only stakeholder in the process who feels like he’s working inside the dust bag of a Hoover upright.

Designing in a Vacuum Q&A: Carl Schattke

05/11/2022 | Andy Shaughnessy, Design007 Magazine
Not long ago, I caught up with Carl Schattke, CEO of PCB Product Development LLC and a longtime PCB designer, for his thoughts on “designing in a vacuum.” As Carl points out, if you follow PCB design best practices, knowing the identity of your fabricator is not a “must-have.” He also offers some communication tips for discovering the information you do need, including one old-fashioned technique—just asking for it.

Tips for Designing in—and Escaping From—the Vacuum

05/10/2022 | I-Connect007 Editorial Team
We asked Monsoon Solutions VP of Engineering Jen Kolar if she had any thoughts on “designing in a vacuum,” and her response was, “Absolutely!” In this wide-ranging discussion, Jen and Senior PCB Engineer and Director of Designer Development Cory Grunwald share some tips and techniques for designing PCBs in a vacuum, and a few methods for getting out of the Hoover’s dust bag. As Cory points out, “In the end, the communication is going to happen anyway. It’s just a matter of whether it happens at the end or in the beginning.”



Copyright © 2022 I-Connect007. All rights reserved.