Flexible Circuit Technology Workshop #5 Tackles Structures, Applications, Materials, and Manufacturing Processes: Think and Plan in Three Dimensions!
October 1, 2020 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute
In just 15 minutes, flex expert Joe Fjelstad will teach you about implementing this useful technology into your manufacturing operation.
Joe suggests you start with defining your end-product requirements and understanding cost and product life cycle expectations, as well as end-user needs. He further addresses the many considerations with adopting this useful technology.
Other segments include topics such as flexible circuit designs, principles, and practices, as well as design guidelines for bending, folding, and dynamic movement of flexible circuits.
Don’t miss what technical editor Pete Starkey calls, “An encyclopaedic series!”
Register here to view this segment and the entire workshop free.
Related Reading
Suggested Items
Boeing Opens Research & Technology Center in Japan
04/23/2024 | BoeingBoeing today opened a Boeing Research & Technology (BR&T) Center in Japan that will focus on innovation to enable the commercial aviation industry meet its goal of net zero carbon emissions by 2050.
Schweizer Electronic Appoints Thomas Gottwald as New Member of the Executive Board
04/23/2024 | Schweizer Electronic AGThe Supervisory Board of Schweizer Electronic AG has appointed Mr. Thomas Gottwald to the Executive Board as CTO (Chief Technology Officer) for a period of 3 years with effect from 1 May 2024.
US Department of Defense Selects Intel Foundry for Phase Three of RAMP-C
04/23/2024 | IntelThe U.S. Department of Defense (DoD) has awarded Intel Foundry Phase Three of its Rapid Assured Microelectronics Prototypes - Commercial (RAMP-C) program.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.