The Pros and Cons of Working Remotely


Reading time ( words)

For this issue of Design007 Magazine, Managing Editor Andy Shaughnessy asked me if IPC had any insight into how the “new normal” of working from home has impacted their members. Here is what the IPC technical staff had to say about the advantages and disadvantages of working remotely, as well as working with IPC volunteers who are new to working from the dining room table.

Mike Milostan
Marketing Director
This is a new experience for many in the electronics industry who have never worked from home or have had limited experience working from home. The most common experience has been plugging in at the hotel room after putting in a full day at a customer site and sending the day’s notes back to the boss, as well as plans for the next day. Having two college students at home, as well as myself, needing working space was a struggle at first. “Who gets the desk vs. the dining room table vs. the spare bedroom desk?” Making sure we had a solid internet connection was also a concern for three users, and we had to work around video calls to ensure there was a solid connection for the Zoom user. We had to make sure there was no noise when someone was on a call, in addition to no one yelling, “Hey, get the phone.” The only struggle we still experience is, “What do we do with our spare time?” There are only so many times you can ask. “Did you work out today?” “Did you find any part-time work?” “What is your schedule for the fall?” Finally, since working from home is mandatory, I see more meetings scheduled during my lunchtime. I have now experienced eating during a meeting, which I had not done when working from home was only an option.

Teresa Rowe
Senior Director, Standards
There is a difference between working remotely on a full-time basis and being thrust into it because of a virus that we can’t see, feel, taste, hear, or smell. One of the biggest differences is the location. Most IPC staff have an office area, even if it is only a desk and a lamp. Sure, we can move around, but there is a place to go to work. The task group members I speak to on a regular basis tell me that isn’t true for them. They are working from dining room tables, kitchen islands, coffee tables in living rooms, etc. This is disruptive because they then try to have fun or relax in the same spot later in the day. This alone can cause them stress.

To read this entire article, which appeared in the July 2020 issue of Design007 Magazine, click here.

Share

Print


Suggested Items

Emerging Engineer: Jesse Vaughan

03/31/2021 | Andy Shaughnessy, Design007 Magazine
Jesse Vaughan, a member of the IPC Emerging Engineer program, discusses some of the takeaways from this year's virtual IPC APEX EXPO.

Turning ‘Garbage In, Garbage Out' into ‘Good In, Good Out’

03/23/2021 | Tamara Jovanovic, Happiest Baby
In the PCB design cycle, it is so easy to unintentionally introduce “garbage” into your system. Unless you have time to extensively check everything you bring in from an external source, it is very likely that something will not match up with your design data. In the end, this means you’ll have to put more work into your design and basically reverse-engineer a part that was supposed to save you time and effort.

Karen McConnell: Recipient of the IPC Raymond E. Pritchard Hall of Fame Award

03/11/2021 | Patty Goldman, I-Connect007
"I heard about IPC when I started a new job at UNISYS after graduating college. I moved from ASIC design to printed circuit boards," said Karen McConnell after being inducted into the Raymond E. Pritchard Hall of Fame. "At the time, in the late ’80s and early ’90s, there were rumors going around that printed circuit boards were going to disappear, and ASICs were going to take over the world. But something in printed circuit boards fascinated me. I minored in robotics in college as an electrical engineer and the data used to fabricate, assemble and test the boards is actually all robotic language. I was hooked."



Copyright © 2021 I-Connect007. All rights reserved.