Keysight White Paper: PCIe 5.0 Design Tools and Techniques


Reading time ( words)

Over the past few years, many protocol standards have surfaced to address the demand for more efficient, higher data throughput. Each new generation delivers additional features and faster data transfer rates than the previous. PCI Express 5.0 represents the latest in PCIe standards, doubling the data rate and improving overall communication efficiency. With these improvements, the challenges with testing and implementation increase. 

The overwhelming concern for designers is interoperability and backward-compatibility. Designers need tools to help them validate their designs to ensure performance and compliance to the standard.

The Keysight Technologies white paper PCIe 5.0—The Next Generation of Peripheral Component Interconnect has the answers to your PCIe design questions.

To download this white paper, click here.

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/15/2021 | Andy Shaughnessy, Design007 Magazine
Hard to believe that a year ago, I was getting ready to attend DesignCon and IPC APEX EXPO and wondering if this Novel Coronavirus was going to cut into attendance from the Pacific Rim. Now, we’re accustomed to virtual trade shows. They’re not ideal, but they’re the best we can do while meeting in person is not possible. We’ve learned to adapt.

Roundtable Discussion: App Notes and Fab Notes

11/09/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy recently invited four recent contributors—Dana Korf, Jen Kolar, Mark Thompson, and Kelly Dack—to review the June and August 2020 issues of Design007 Magazine, which covered app notes and fab notes, respectively. In this wide-ranging roundtable, the group discusses some of the ongoing challenges related to incomplete and inaccurate design data and why communication can preclude many of these problems. What follows is the transcript from this conversation.

Combatting Thermal Challenges With TRM Software

10/07/2020 | I-Connect007 Editorial Team
Johannes Adam is the creator of a simulation tool called Thermal Risk Management (TRM) used to help PCB designers and design engineers predict hot spots on the board before during layout. He and Douglas Brooks, founder of UltraCAD Design, have used the tool to produce several technical articles and a book on the subject. In this interview, they tackle the biggest misconceptions they see from designers and engineers who deal with thermal management issues.



Copyright © 2021 I-Connect007. All rights reserved.