Koh Young Update With Quintin Armstrong


Reading time ( words)

During IPC APEX EXPO 2020 in San Diego, California, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers.

In this video interview from the show, Quintin Armstrong, Americas service and applications senior manager for Koh Young, updates Guest Editor Dick Crowe on Koh Young America's Technical Services Team, where the focus is on AOI of components and materials on the stuffed board, as well as demonstrations and training at their new facility in Duluth, Georgia.

IPC APEX EXPO is the largest PCB industry event in North America. The next IPC APEX EXPO is planned for January 26-28, 2021, at the San Diego Convention Center.

To watch this interview, click here.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/15/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”



Copyright © 2021 I-Connect007. All rights reserved.