Industry Outlook With Siemens’ Fram Akiki


Reading time ( words)

During IPC APEX EXPO 2020 in San Diego, California, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers.

In this video interview from the show, Dan Feinberg speaks with Fram Akiki, VP of electronic and semiconductor industries for Siemens, about the biggest challenges in the electronics industry. They also discuss major industry trends, including smart connected devices used in autonomous transportation and robotics, increased complexity, and a reduced time to market.

IPC APEX EXPO is the largest PCB industry event in North America. The next IPC APEX EXPO will be held January 26−28, 2021, at the San Diego Convention Center.

To watch this interview, click here.

Share

Print


Suggested Items

Tech 2 Tech: KYZEN’s Short Technical Sessions a Big Hit

01/20/2021 | Nolan Johnson, I-Connect007
Nolan Johnson gets an update from Tom Forsythe on KYZEN’s Tech 2 Tech sessions. These brief 15-minute sessions were set up during the pandemic by KYZEN for customers, prospects, and new engineers around cleaning, and have since found traction with their manufacturers, reps and distributors.

Tales from a Trailblazer: An Interview with Christine Davis

01/05/2021 | Steve Williams, The Right Approach Consulting LLC
Columnist Steve Williams recorded a series of interviews with new I-Connect007 columnist Christine Davis, president and founder of contract manufacturer CAMtek, who recently joined Zentech Bloomington. As a female business owner in a male-dominated industry, Christine has a unique perspective on what it takes to thrive in the electronics industry, and shares some of her stories and lessons learned along the journey.

Chapter 1 Excerpt: The Printed Circuit Assembler’s Guide to Process Validation

12/31/2020 | Graham Naisbitt, Gen3 Systems
The original principle underlying the IPC’s ionic cleanliness requirement was that the mobility of surface ions, detectable from SIR measurements, would correlate to a maximum value of detectable ionic elements permissible on the circuit surface. The industry required a test that was both fast and accurate for process control. Thus, a simplified ion chromatograph that was able to detect ionic elements without differentiation was created.



Copyright © 2021 I-Connect007. All rights reserved.