Meet Eran Navick, I-Connect007 Columnist


Reading time ( words)

Meet Eran Navick, one of I-Connect007’s newest columnists! In his columns, Eran will discuss technology around the world, touching on all aspects of PCB technology, especially high technology.

Eran Navick has been in the PCB business for over 25 years and held key positions in PCB companies, including as a PCB designer and applications engineer. During his career, he has worked with PCB companies all around the world and has a very strong knowledge of PCB technologies globally. He is currently the CEO of FineLine USA with responsibilities for all of Fineline Global’s North American operations.

Read "Global Technology" in the Design007 Week Newsletter. Subscribe today!

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

06/17/2022 | Andy Shaughnessy, Design007 Magazine
We’re still not officially into summer yet, but Atlanta is bringing the heat, baby! It’s hit 97 degrees a few times this week, and I now have a fan aimed right at my face. At least it’s nice and humid too. I’m glad I don’t wear make-up. And it’s been a hot week in the circuit board community. This week, Eltek reported a fire at a board shop in Israel, and Flex committed to building a 145,000-square-foor facility in Jalisco, Mexico to serve the electric and autonomous vehicle segment.

Additive Manufacturing Requires Additive Design Techniques

05/09/2022 | Luca Gautero, SUSS MicroTec
Although I am not a designer by trade, I want to share my thoughts on what additive manufacturing means for designers, especially how it relates to solder mask. In this article, you will learn what topics I feel are the most important to address.

Additive Design: Same Steps, Different Order

04/12/2022 | I-Connect007 Editorial Team
We recently spoke with Dave Torp, CEO of Winonics, about the company’s additive and semi-additive processes and what PCB designers need to know if they’re considering designing boards with these new technologies. As Dave explains, additive design is not much different from traditional design, but the steps in the design cycle are out of order, and additive designers must communicate with their fabricators because so much of the new processes are still proprietary.



Copyright © 2022 I-Connect007. All rights reserved.