Words of Advice: What are Your Biggest Design Challenges?


Reading time ( words)

In a recent survey, we asked the following question: What are your biggest design challenges? Here are just a few of the answers, edited slightly for clarity.

  1. Ignorant EEs.
  2. Assumptions from the designer that result in a crazy manufacturing process.
  3. Designing rigid-flex.
  4. Ensuring maximum yield, minimum cost.
  5. Time to market.

Share

Print


Suggested Items

Joe Clark Says DownStream Is Ready for More Growth in 2020

02/20/2020 | Kelly Dack, CID+, EPTAC
Joe Clark, co-founder of DownStream Technologies, gives Kelly Dack an overview of the company and their innovative product line, which serves to smooth the bumps that can occur between source design output and manufacturing line input. As Joe explains, 2019 was a great year for the company, and he expects that trend to hold through 2020.

AltiumLive Frankfurt 2019: Happy Holden Keynote

12/12/2019 | Pete Starkey, I-Connect007
Nobody left early! Altium had wisely kept Happy Holden’s keynote presentation on “PCB Trends that Will Impact Your Future” until the end of the final day of the AltiumLive 2019 European PCB Design Summit in Frankfurt, Germany. Pete Starkey presents the highlights of Happy's presentation.

ODB++: Transforming Ideas Into Products

10/09/2019 | Max Clark, Mentor, a Siemens Business
The ODB format originated with the objective of delivering on this need. The format was originally introduced for use by PCB fabricators, eliminating the need for a collection of CAM files in multiple formats—such as Gerber, Excellon, IPC-356, or even IPC-350, which was an early attempt to simplify this process. The key to the success of ODB was that it obtained industry acceptance.



Copyright © 2020 I-Connect007. All rights reserved.