Emerging Themes: Day 2 Coverage of productronica 2019


Reading time ( words)

Day two at productronica, and the themes emerge: 5G, high-speed, low-loss, and new formulations. These were the catchphrases of the materials suppliers. It is clear from all the conversations that designers and board specifiers need to learn all they can about the new materials emerging on the market.

The equipment makers are engaging in that same conversation with new capital equipment that either provides additional capabilities to support these new materials, or data collection and reporting via the Industry 4.0 protocols, or both. Wet process equipment continues to move toward the realization of the digital factory and the “lot size of one," with systems that adjust the parameters as needed, automatically.

CAM providers are chipping away at the work process walls that have traditionally existed between design and CAM, as well as knocking holes in the hand-off to fabrication to assembly. New software features and applications are aimed squarely at taking the drudgery out of the operation, finally letting the computers do what they do well.

Chemistry providers had news to share, as well. Atotech announced the addition-through-acquisition of the Via King graphite-based product to the portfolio. And not to be left out at all, solder mask and conformal coatings suppliers talked about environmental extreme protection, application accuracy, and efficiency.

It becomes very clear, after day two that the digitalization of the electronics manufacturing factory is the most effective path to increased profitability.

Enjoy the photos from Wednesday’s productronica show floor. We’ll continue to bring you quick coverage throughout the rest of the week from Messe München and the productronica exposition.

Share

Print


Suggested Items

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.

Chemcut: Wet Processing Equipment for the Long Haul

09/06/2019 | Barry Matties, I-Connect007
Chemcut CEO and General Manager Rick Lies speaks about the growth he has seen in the marketplace over his 18 years in the industry, and how Chemcut has been able to remain competitive in the PCB and photochemical milling spaces. Jerry Reitz, Chemcut’s HES manager, also addresses the current shift towards zero-discharge facilities.

Putting Green Into a Brownfield Facility

09/05/2019 | Nolan Johnson, I-Connect007
George Milad, national accounts manager for technology at Uyemura, talks about what is driving change in the wet process marketplace and how chemistries must fit into next-generation product design while also meeting new environmental requirements.



Copyright © 2019 I-Connect007. All rights reserved.