-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Additive Electronics Conference Set for October 2019 Debut
October 15, 2019 | Kelly DackEstimated reading time: 9 minutes
Kelly Dack and Tara Dunn talk about the upcoming conference "Additive Electronics: PCB Scale to IC Scale" on October 24, 2019, hosted by SMTA in San Jose, California, and why it’s an important event for people to attend—especially those involved in the design process.
Kelly Dack: I’ve heard a lot recently about additive electronics, and I’m familiar with the subject only from the standpoint of 3D printers layering up different materials, including conductive materials. But a couple of weeks ago, I reconnected with Tara Dunn who talked to me about the Additive Electronics Conference that’s coming up, which will cover a very different realm. My perception was that this particular context of additive electronics is more of a micro-scale take on finished copper. We discussed seeing copper on a very small scale, which can build circuitry in the range of three-thousandths of an inch all the way down to five microns. I am excited and want to know more about it. Tara, can you tell us what this conference is about?
Tara Dunn: We’re looking for different options to attack the market segment that is sub-75-micron trace and space all the way down to the 5-micron trace-and-space range. This is that gap area between PCB manufacturing and IC fabrication.
Dack: That’s sounds very interesting. Would this be considered cutting-edge or uncharted territory for most PCB designers and engineers?
Dunn: Definitely. People being introduced to the technology will often ask, “What are the design rules?” The blunt answer is there are really aren’t design rules just yet; everything is still developing quickly, and the designs tend to be much more collaborative than we’re used to with traditional PCB design rules. For instance, somebody may come to us and say, “I have this idea, I need this type of material, and I’m trying to accomplish this. How can we go about it?” Tt becomes a brainstorming session. How can we use the technology that we have today in different ways to figure out how to solve the problem?
One of the things we’re hoping to do at the conference is spark a lot of ideas. We want to provide a lot of opportunities for people to let their imagination kick into gear and think, “This person is using this technology this way; how might I be able to apply that?” We want it to be very interactive.
Dack: This is a really good subject for designers. As a designer myself, and having designed lots and lots of flex circuitry, I have learned what you can’t do by making mistakes—especially with copper. Over the years, a designer learns that there are types of processed copper. The copper thickness and grain structure must be considered along with conductor layer topology. Trace or conductor widths are critical not only in considering electrical performance but also in manufacturability. That criticality has to do with the subtractive process of the way we etch copper circuitry onto flex material or any other type of material.
With a subtractive or chemical etching process, there’s a trace structure that based on the height or thickness of the copper foil and relative to the trace width. If a designer isn’t properly considering conductor height to width formulas, the nominal design data—if not addressed by a supplier in CAM—could etch away the base of the copper conductor because of the unique way conductors etch in the tank.
Now, with the additive process, my understanding is that there’s no etch factor. Therefore, the limitations are only in how thin the copper can be printed. At the point that seed copper is printed or imaged onto a surface, the conductors can be grown from that copper, and the cross-section of the conductor doesn’t take on this strange trapezoidal shape as it does during a print and etch cycle; instead, it forms a rectangular shape or thereabouts. Is that true?
Dunn: Yes. There are a couple of different technologies that have received a lot of publicity within the last couple of years, which were triggered by the news that many of the current smartphones are using the modified semi-additive process in very high volume, offshore. Now, we’re looking at having similar technology to mSAP or a semi-additive process here domestically with low-volume and development-type work.
The basic idea behind these two processes is that you start with a very thin seed layer of copper, and that’s usually the key: the thinness of that copper, whether you’re using a very thin copper foil or putting a seed layer of copper down chemically. Then, it becomes an imaging process. You apply your resist, do your imaging, and then use electrolytic copper to plate the traces up to the desired width that you’re looking for. And you’re right, Kelly; because we’re not subtractively etching the trace will straight up and down, there will be no trapezoidal effects. There are RF benefits, in addition to the advantages of space, weight, and packaging. From that point on, these processes are run through PCB fabrication with the same processes used for subtractive etch today.
Page 1 of 2
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.