July 2019 Issue of Design007 Magazine Available Now


Reading time ( words)

Design-July2019-cover250.jpgReliability has been in the news quite a bit lately, in large part because of microvia failures in military and aerospace PCBs. This month, we look into the secret life of vias as the culprit for failures. 

We also introduce our brand-new Flex007 section, which will be a regular part of Design007 Magazine from now on. Find out more in the July 2019 issue of Design007 Magazine.

This month’s issue of Design007 Magazine is now on the virtual newsstand, and available for delivery in your e-mailbox by subscribing here.

Share

Print


Suggested Items

What It Takes to Be a Milaero Supplier, Part 1

02/25/2020 | Anaya Vardya, American Standard Circuits
The decision to pursue military and aerospace (milaero) certification impacts every facet of the organization, and not every shop is prepared to make this transformation. This is the first article in a four-part series, breaking down what it takes in sales and customer service, engineering and CAM, purchasing and quality, and manufacturing. Anaya Vardya starts by exploring sales and customer service.

Are ISO Procedures Strangling Innovation?

01/29/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy recently spoke with Quantel’s Roger Beers, who voiced his concerns about the struggles engineering departments face when dealing with new technologies within ISO procedures. While great for repeatable processes, Roger says ISO in its current state may be preventing engineering growth.

Meet John Watson, I-Connect007 Columnist

01/21/2020 | I-Connect007 Editorial Team
Meet John Watson, CID, one of our newest I-Connect007 columnists! John has been in the electronics industry for 40 years, with 20 of them being in PCB design, and is now a senior PCB engineer for Legrand Corporation. Read "Elementary, Mr. Watson" in Design007 Week Newsletter.



Copyright © 2020 I-Connect007. All rights reserved.