EMA Webinar: PCB Routing Tips from the Pros


Reading time ( words)

EMA Design Automation will hold a webinar, “Your Route to Design Success: PCB Routing Tips from the Pros” on April 23, 2019 at 2:00 p.m. ET. Rocco Calvello, senior application engineer at EMA Design Automation, will be the presenter of the webinar.

Event Details:

  • Learn how to properly prepare your design for routing.
  • Review stackup requirements and how your stackup can have a significant effect on routing success and strategy.
  • Learn how to define constraints for your critical nets to ensure correct operation.
  • Tips on fan-out and via usage to aide in breakout routing and power distribution.
  • Strategies for bus routing of bulk signal nets. Tips for final cleanup and review of routing

To register, click here.

Share

Print


Suggested Items

Words of Advice: What Feature Would You Like to See in Your CAD Tool?

05/30/2019 | Andy Shaughnessy, Design007 Magazine
In a recent survey, we asked the following question: What feature would you like to see in your CAD tool? Here are a few of the answers, edited slightly for clarity.

Automation and the Smart Factory: Introduction to Industry 4.0

05/13/2019 | Happy Holden, I-Connect007
There’s a lot of talk about automation, but I find that there is very little available on automation planning. This is one of my specialties. I started by studying for an MSEE in control theory, which went well with my bachelor’s degree in chemical engineering because I specialized in process control and IC manufacturing.

CPCA 2018 Seminar Overview

07/24/2018 | Happy Holden, I-Connect007
I had the good fortune to speak at a seminar sponsored by the CPCA and organized by the China Team of I-Connect007 in Shanghai. This full-day seminar was on one of today’s hot topics, “Automation in PCB Manufacturing.”



Copyright © 2019 I-Connect007. All rights reserved.