April 17: IPC Webinar on Weak Interface/Stacked Microvia Reliability


Reading time ( words)

For the upcoming IPC Wisdom Wednesday Webinar on April 17, the topic will be on weak interface/stacked microvia reliability concerns, to be presented by Dennis Fritz, IPC V-TSL-MVIA Co-Chair. The webinar is scheduled for 10:00–10:45 am CDT.

IPC has issued an industry warning on microvia reliability for high performance products. A number of IPC OEM member companies have presented examples of microvia failures that were not observed until after bare printed board fabrication, inspection and acceptance.

This free webinar will discuss why IPC has issued this warning and will provide an overview of this problem, with examples of the different conditions of concern. It will also cover how IPC has organized to address the problem, including sub-teams formed earlier this year at IPC APEX EXPO.

To gain a deeper understanding of this issue and how it may impact the design and testing of bare boards, register today by clicking here.

Share

Print


Suggested Items

IPC’s PCB Tech Trends Study Highlights Issues Impacting Fabricators

06/11/2019 | Michael Carano, RBP Chemical Technology
The 2018 survey results indicated the need for speed and low loss as critical functions of the materials chosen. This is the digital age, and with the Internet of Things, virtual and augmented reality, vehicle-to-vehicle communication, etc., the need for low-loss and ultra-low-loss materials continues to grow as a percentage of circuit boards fabricated.

PCB Fabricators’ Tech Capabilities Exceed OEMs’ Needs in Many Areas

06/06/2019 | Dennis Fritz, Fritz Consulting
Some interesting differences showed up in the board property data reported by the OEMs and PCB fabricators that participated in IPC’s PCB Technology Trends 2018 study.

Orbotech Celebrates Success of Orbotech Diamond and Discusses Future Trends

05/31/2019 | Barry Matties, I-Connect007
At the recent CPCA Show in Shanghai, Orbotech celebrated having over 100 of their Orbotech Diamond™ direct imaging machines in the marketplace. Barry Matties caught up with Meny Gantz—VP of marketing for Orbotech’s PCB division—to talk about the drivers behind the success of Orbotech Diamond systems before turning the conversation toward the future and Industry 4.0.



Copyright © 2019 I-Connect007. All rights reserved.