Words of Advice: Flex Design and Manufacturing Training


Reading time ( words)

In a recent survey, we asked the following question: Where do your technologists acquire training or expertise regarding flexible circuits? Here are just a few of the answers, edited slightly for clarity.

  1. We have 30 designers and maybe 1/3 of them have flex design experience. We don't have structured training for flex, but designers do share with other team mates to help.
  2. We work closely with our vendors to design the system.
  3. Training on the job.
  4. Learning by asking other staff members.
  5. Flex manufacturers generally help in the layer stack-up definition, and in design rules optimization.

Share

Print


Suggested Items

John Michael Pierobon Discusses His Flex Design Class

10/01/2019 | Andy Shaughnessy, Design007 Magazine
If you’re new to flex design, you might want to check out an online course offered by All Flex, a flex fabricator. The course, Designing Flexible Circuits, was created by John Michael Pierobon. I asked John Michael to discuss his flexible circuit design course, and whether online curriculum can ever replace good old-fashioned live instruction.

Insulectro and DuPont Experts Talk Flex Design

09/25/2019 | Mike Creeden, CID+, Insulectro
I recently spoke with Insulectro’s Chris Hunrath and DuPont’s Steven Bowles at the DuPont Technology and Innovation Center in Sunnyvale, California. We discussed a variety of topics related to flex design, including the support structure that’s needed in flex design, the everchanging world of flex materials, and the need for working with a flex fabricator as early as possible in the flex design cycle.

Words of Advice: What are Your Biggest Design Challenges?

09/19/2019 | Andy Shaughnessy, Design007 Magazine
In a recent survey, we asked the following question: What are your biggest design challenges? Here are just a few of the answers, edited slightly for clarity.



Copyright © 2019 I-Connect007. All rights reserved.