Simberian to Demo Simbeor THz Software at DesignCon 2019


Reading time ( words)

Simberian Inc. will participate in the DesignCon 2019 conference and exhibition, January 29-31 at the Santa Clara Convention Center. Simberian will be presenting Simbeor THz electromagnetic signal integrity software, updated with distributed computing on the Linux platform, Simbeor SDK module with API for design automation in C/C++ and Matlab, and with completely automated post-layout de-compositional electromagnetic analysis.

The updated Simbeor THz is the industry-first tool with the validated automatic post-layout de-compositional electromagnetic analysis; almost all structures on test boards can now be simulated without manual adjustments. To accelerate pre- and post-layout electromagnetic analysis, Simbeor 3DML and 3DTF solvers in the updated Simbeor THz are parallelized on a loosely coupled grid of Linux computers available over internal, worldwide or cloud networks (only Windows version was previously supported). It further reduces the cost of PCB/packaging interconnect design.

The distributed computing on the Linux platform further reduces the cost of PCB/packaging interconnect design and strengthens Simbeor’s No. 1 position in the electromagnetic SI software price-performance category. Simbeor THz technologies are now available as Simbeor software development kit or Simbeor SDK.

Simberian’s technology and achievements are recognized at DesignCon 2019 with two nominations for the prestigious industry awards. The paper by A. Manukovsky, Y. Shlepnev, "Effect of PCB Fabrication Variations on Interconnect Loss, Delay, Impedance & Identified Material Models for 56-Gbps Interconnect Designs," co-authored by Intel and Simberian, has been chosen by the Technical Program Committee as a finalist for the DesignCon 2019 Best Paper Award. This marks the third time that Simberian’s founder Yuriy Shlepnev has been selected by the SI community as a finalist for the DesignCon Engineer of the Year Award.

Simbeor SDK provides API to solvers and tools and can be used for design automation with scripting in C/C++ and Matlab languages and as a component in other EDA tools. Simbeor THz, Simbeor Agent for Linux and Simbeor SDK are now available for customers and trials at www.simberian.com.

 

 

Share

Print


Suggested Items

Words of Advice: Planning a New Design

06/06/2019 | The I-Connect007 Team
In a recent survey, we asked the following question: What do you think is the most important thing a designer should remember when planning a new PCB design? Here are a few of the answers, edited slightly for clarity.

Design Rules Recipe: Solvability, Manufacturability, and Performance

06/06/2019 | I-Connect007 Editorial Team
One thing that we’ve noticed lately: Each designer seems to have his or her own way of using PCB design rules. There doesn’t seem to be much agreement about setting or using design rules. So, in this true experts panel, Mike Creeden of San Diego PCB joined Freedom CAD’s Scott McCurdy, Jay Carbone, and Rich Kluever to share their views on PCB design rules.

Wild River, eSilicon, and Samtec Team up for 112-Gbps Test Vehicle

06/06/2019 | Andy Shaughnessy, Design007 Magazine
During DesignCon, I sat down for an interview with Tim Horel from eSilicon, Al Neves of Wild River Technology, and Matt Burns from Samtec. They’ve recently teamed up to create a 112-Gbps test vehicle that may be the first of its kind of test fixture.



Copyright © 2019 I-Connect007. All rights reserved.