-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Robert Art on the Importance of Thermal Management
January 7, 2019 | Pete Starkey, I-Connect007Estimated reading time: 12 minutes
Robert Art, global account manager for IMS materials at Ventec International Group, discusses future market requirements for thermal management materials, the need for a better understanding of the concept of thermal impedance, and an initiative to propose a consistent industry-standard method for measuring thermal conductivity while at electronica 2018.
Pete Starkey: Robert, it's great to meet you. Thank you for taking the time to talk with me.
Robert Art: Thank you.
Starkey: You're an expert in materials for thermal management. We know that over the last several years, Ventec has established a leading position in IMS materials, and you have a good forward vision of the market. Can you tell us what the market is expecting of you now, and in which direction you are going to meet future market needs and expectations?
Art: The market is looking for what it has always looked for—better thermal performance. In every sales meeting and discussion with customers and at trade show events, the engineering community is always looking for better thermal performance. Our VT-4B7 material is a star performer amongst our market-leading VT-4B family of high-performance IMS materials. We continue to push the envelope when it comes to developing stronger, more reliable robust dielectrics that can be thinner to reduce thermal impedance and resistance values.
Starkey: Can you give me a couple of points of reference? What sort of thermal conductivities are achievable with these materials, and when you talk about "thin," what's a point of reference for thinness?
Art: With respect to thermal conductivities, the current Ventec product line-up ranges anywhere from two watts per meter-Kelvin all the way up to roughly 10 watts per meter-Kelvin. From a thickness standpoint, we have one new product out on the market called VT-4B5SP that is available in a thickness of 40 microns. That's an incredibly thin dielectric that still has a very good voltage withstand and excellent thermal conductivity.
Starkey: Is that a reinforced dielectric or a filled-resin dielectric?
Art: It's a filled-resin dielectric with no fiberglass or other carrier reinforcement.
Starkey: And you can get that down as thin as 40 microns?
Art: Correct.
Starkey: We continue to try very hard to explain to people that the most significant consideration is the concept of thermal impedance rather than just thermal conductivity. Even if you have high thermal conductivity, if the heat has a long path to get through, there’s going to be resistance to the flow. The shorter you can get that path, the better, and it's really important to explain this.
Art: Exactly. We need to continue to educate and help our customer base. Take LEDs, for example; even though IMS substrates have become very commonly used in LED applications, we still come across engineers who focus solely on thermal conductivity. Thermal conductivity is a great characteristic to use for benchmarking materials, but it is not the only attribute that designers should pay attention to. They need to consider dielectric thickness and the overall thermal resistance. That is truly what matters—the resistance to heat flow. As you mentioned, you can have a product at 10 watts per meter-Kelvin, but if it's in a 150- or 200-micron dielectric, then the thermal resistance will be high, and the overall path of heat may not be as good as it could be through a thinner dielectric with a lower thermal conductivity.
Starkey: To try to achieve a dielectric thickness reliably at 40 microns must present a lot of challenges in the manufacturing process. How do you overcome those challenges?
Art: That's a really good question. Ventec has without a doubt the best R&D staff community in the IMS world in my opinion. A lot of time and care is taken to perfect a manufacturing process and speeds of conveyors and lamination cycles to be able to consistently reproduce a dielectric at 40 microns with very high yield and efficiency.
Starkey: The other consideration is that on the one hand, you want to conduct heat, but on the other, you want to maintain electrical insulation.
Art: Yes. Although there are products on the market that are slightly thinner than 40 microns, the challenge is holding to a tighter tolerance. So, when you commit to a thin dielectric, the customer base wants that to be the same dielectric thickness with each and every shipment. A 40-micron dielectric with a ±40-micron thickness tolerance is really of no value. You're absolutely right; it's a hard line between thermal performance, electrical isolation, and peel strength. Trying to juggle all three of those attributes and hold to something that's less than 50 microns is quite a challenge.
Starkey: Where is the main area of application for these high-performance materials?
Art: The primary application today for these extremely thin dielectrics is in LED lighting, which is a high performer.
Starkey: Is this LED lighting for automotive, municipal, industrial, or domestic?
Art: The answer really is all of the above. The hottest market today is automotive lighting for these types of dielectrics, but we also see them in parking lot lights, parking ramp lights, and street lights. Most of those designs today use a number of boards—it's not just one dedicated board; it might be four, six, or eight different boards in a lighting unit. The desire by the engineering community is to get all of those LEDs and connectors onto one board, so it's much more robust and reliable. Each time you add an additional board into a module, you create more risk as far as efficiency and failure. These thin dielectrics allow customers to go to a one-board system, and that represents a great savings in total system cost.
Starkey: You've progressively developed to a very high level of specification, and have a vision of what the market is going to call for in the future. Is there a realistic limit to what you can achieve? Is there any benefit in pushing it any further than that, or do you look for alternative technologies if you have more heat than this sort of material can handle?
Art: Good question! Do we push the envelope? We have to! To stay in the mindset of the customer as a world leader or a supplier to look for the next best-generation product, we have to push the envelope. We consider the characteristics of IMS that are not only focused on the dielectric. There are attributes with the total material stackup that can be altered, changed, or adjusted that produce even better results. There's a whole concern in the industry with IMS because generally speaking, the base plate in an IMS stackup is aluminum. That has wildly different CTE values than the copper foil that becomes the circuit trace. Solder joint reliability is a big concern today for many customers, and not exclusive to automotive; we see it in other markets too.
If you look at our roadmaps, some of the product offerings we're pursuing not only improve the thermal performance or peel strength but also improve the modulus of the dielectric to make it more conducive to providing a really solid solder joint. Solder joint fatigue is a big issue in our marketplace today, and that's an area of focus for our future development.
Page 1 of 2
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.