Mentor Webinar on Best Practice Design Processes


Reading time ( words)

Increasing performance requirements coupled with a pressure to improve product quality are driving engineering teams to consider alternatives to their current validation approach. Best-practice design processes validate a digital twin model of your design early and often to minimize re-spins and actually shorten the overall design cycle.

This 'left shift' approach enables design engineers and layout designers to validate within their native environment, minimizing the bottleneck waiting for specialist reviews, and freeing the specialists to resolve the remaining critical issues.

This session will look at new, integrated technologies for analysis and verification deployed throughout the design process, including: schematic verification, signal & power integrity, electrical sign-off, thermal, vibration, testability and manufacturability.

This webinar is presented by David Wiens, product manager of the Systems Design Division of Mentor Graphics, a Siemens business.

To view this webinar, click here.

Share

Print


Suggested Items

EMA: Cadence Moves Simulation Further Up in the Design Cycle

03/15/2019 | Andy Shaughnessy, Design007 Magazine
Cadence Design Systems recently integrated more of its Sigrity capabilities into the front end of its PCB design tools. During DesignCon, Chris Banton of EMA Design Automation spoke with me about how this drive for “model-less analysis” benefits the PCB designer who can now access signal and power integrity, DFM, and electrical rule checking functionality early in the design process and have fewer issues later.

Words of Advice: What are Your Biggest Design Challenges?

03/11/2019 | Andy Shaughnessy, Design007 Magazine
In a recent survey, we asked the following question: What are your biggest design challenges? Here are just a few of the answers, edited slightly for clarity.

Todd Westerhoff Discusses His New Position and Much More

03/07/2019 | Andy Shaughnessy, Design007 Magazine
At DesignCon, I met with our old friend Todd Westerhoff, a veteran signal integrity engineer. Todd joined Mentor, a Siemens Business, since we last spoke. We discussed his new job responsibilities, his drive to get more designers and engineers to use SI tools, and the increasing value of cost-reduced design techniques versus overdesigning PCBs.



Copyright © 2019 I-Connect007. All rights reserved.