Flex Talk: Additive Electronics—PCB Scale to IC Scale

Reading time ( words)

SAP, mSAP, SLP—what kind of crazy acronyms have we adopted now, and how much do you really need to know? In terms of consumer electronics, there is a good chance that the smartphone attached to your hand at all times contains a PCB fabricated with this technology—or at the very least, the next-generation smartphone that you purchase will utilize mSAP technology. In terms of current-day PCB design and fabrication, that really depends on where you are now with technology. The standard subtractive-etch process serves the industry well. Developments in materials, chemistry and equipment enable the traditional PCB fabrication process to achieve feature sizes such as line and space down to 30 microns. Larger shops with more sophisticated capabilities are building this technology today. Mainstream PCB manufacturing is often limited to 50-75 microns (µm) line and space. But the electronics industry is evolving quickly. Propelled by the demand for more sophisticated electronics, the PCB design is being tasked with finer lines, thinner materials and smaller via sizes. A traditional progression is to first move to HDI technology with microvias and multiple lamination cycles for fabrication. Today’s mSAP and SAP technology offers an advanced approach, with line and space capabilities of less than 25 microns, to meet these exceedingly complex design requirements.

A Few Definitions

• Subtractive etch process: commonly used to fabricate printed circuit boards. This process begins with copper-clad laminate, which is masked and etched (copper is subtracted) to form traces
• Additive PCB fabrication: this process utilizes additive process steps, rather than subtractive process steps to form traces
• SAP: semi-additive process, adopted from IC fabrication practices
• mSAP: modified semi-additive process, adopted from IC fabrication practices
• SLP: substrate-like PCB; a PCB using mSAP or SAP technology instead of subtractive etch technology

To read the full version of this article which originally appeared in the September 2018 issue of PCB007 Magazine, click here.

05/23/2023 | Barry Matties and Nolan Johnson, I-Connect007

Every industry has a beginning, and we are lucky to have Rex Rozario here to share the story of how the printed circuit board industry got its start. I-Connect007 chatted with Rex recently about how he became involved with circuit board inventor Dr. Paul Eisler.

05/17/2023 | Andy Shaughnessy, Design007 Magazine

At the SMTA Atlanta Expo and Tech Forum, I spoke with NCAB Group Field Application Engineer Ramon Roche, who gave a presentation at the show titled, “Technical Trends in the Global PCB Industry.” Ramon and I discussed his presentation, the emerging technologies that have NCAB’s focus over the next few years, and why semi-additive processes may be the key to succeeding with ultra HDI technology.

05/10/2023 | Pete Starkey, I-Connect007

It’s been a little while since I first had the opportunity to review an EIPC Technical Snapshot webinar. This excellent series began in October 2020 when our industry was besieged by the COVID-19 pandemic. It has continued successfully as restrictions have lifted and provides an effective channel for the efficient sharing of relevant knowledge that complements the traditional live conferences. The 20th in the series, in December 2022, focused on environmental issues impacting the electronics industry. In early February, EIPC held its live Winter Conference in Lyon and now, by popular demand, the 21st Technical Snapshot fills a slot before the Summer Conference scheduled for mid-June in Munich.