RF/Microwave eBook: Beneficial Tool for Engineers


Reading time ( words)

Released earlier this year, hundreds of engineers and other readers interested in PCB design have downloaded The Printed Circuit Designer’s Guide to… Fundamentals of RF/Microwave PCBs micro eBook.

This book is part of I-Connect007’s ongoing series, The Printed Circuit Designer’s Guide to…, which is specifically dedicated to educating PCB designers and serves as a valuable resource for readers seeking the most relevant information available. Written by American Standard Circuits’ John Bushie and Anaya Vardya, Fundamentals of RF/Microwave PCBs is a strong follow-up to their first design title, Flex & Rigid-Flex Fundamentals.

This book provides information needed to grasp the unique challenges of RF PCBs. The authors answer two main questions: what is the correct material to use for a particular project, and what can be done at the design stage to make a product more manufacturable? Readers, especially RF PCB designers, will gain a better understanding of issues related to the design and manufacture of RF/microwave devices from a PCB fabricator perspective.

“[This book] can be read in one sitting and speaks to engineering, design, layout, materials, and procurement,” commented Darren Smith, Athenatech U.S.A. "It’s a critical read for designers new to RF layout or combining multiple impedance environments."

Judy Warner, director of community engagement at Altium, stated, "This concise, yet very thorough book is destined to become every RF and microwave engineer's PCB fabrication bible. From material selection to skin-effect and the complexity of heat sink technology, ASC has shared every key aspect to fabricate these incredibly challenging boards successfully. Read it and watch your yields increase and your re-spins decrease!"

Download your free copy today! You can also view and download other titles in our full library.

We hope you enjoy The Printed Circuit Designer’s Guide to… Fundamentals of RF/Microwave PCBs.

 

For more information, contact:
Barb Hockaday
I-007eBooks
barb@iconnect007.com
+1-916-365-1727

Share

Print


Suggested Items

EMA: Cadence Moves Simulation Further Up in the Design Cycle

03/15/2019 | Andy Shaughnessy, Design007 Magazine
Cadence Design Systems recently integrated more of its Sigrity capabilities into the front end of its PCB design tools. During DesignCon, Chris Banton of EMA Design Automation spoke with me about how this drive for “model-less analysis” benefits the PCB designer who can now access signal and power integrity, DFM, and electrical rule checking functionality early in the design process and have fewer issues later.

Words of Advice: What are Your Biggest Design Challenges?

03/11/2019 | Andy Shaughnessy, Design007 Magazine
In a recent survey, we asked the following question: What are your biggest design challenges? Here are just a few of the answers, edited slightly for clarity.

Todd Westerhoff Discusses His New Position and Much More

03/07/2019 | Andy Shaughnessy, Design007 Magazine
At DesignCon, I met with our old friend Todd Westerhoff, a veteran signal integrity engineer. Todd joined Mentor, a Siemens Business, since we last spoke. We discussed his new job responsibilities, his drive to get more designers and engineers to use SI tools, and the increasing value of cost-reduced design techniques versus overdesigning PCBs.



Copyright © 2019 I-Connect007. All rights reserved.