Leo Lambert Discusses IPC Training Program Updates


Reading time ( words)

During SMTA International, EPTAC Technical Director Leo Lambert and Managing Editor Nolan Johnson discuss a variety of recent IPC educational program updates, many of which are designed to smooth out the training process. Lambert also explains how these changes will allow EPTAC instructors to optimize the way they present IPC classes, which include the CID and CID+.

To watch this interview, click here.

Share

Print


Suggested Items

This Month in Design007 Magazine: Thermal Fundamentals With Mike Jouppi

09/09/2020 | I-Connect007 Editorial Team
The I-Connect007 team recently interviewed Mike Jouppi, one of the champions of thermal management in PCBs. Mike spent decades working on updating the old IPC current-carrying data, which dated back to the 1950s, and he is the primary architect behind IPC-2152— the standard for determining current-carrying capacity in printed board design. As Mike explained in this wide-ranging interview, even if you’re using the latest thermal design software, you still need to have a firm understanding of the fundamentals.

Real Time With…I-Connect007: The App Notes and Fab Notes Roundtable

09/03/2020 | Andy Shaughnessy, PCB Design007
Most of our readers are familiar with our Real Time With... video program. For over a decade, we’ve been a staple at trade shows and conferences around the world, doing on-camera interviews with the industry’s top technologists, managers, and executives. Now, Real Time With…I-Connect007 is turning the cameras around to focus on recent issues of our magazines. In this first installment, four of our recent contributors—Dana Korf, Jen Kolar, Mark Thompson, and Kelly Dack—review the June and August issues of Design007 Magazine, which covered app notes and fab notes, respectively.

Chris Hanson: New Ventec IMS Dielectrics Rated for Higher Temps

07/07/2020 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy recently spoke with Chris Hanson, global head of IMS Technology for Ventec International Group. During their conversation, Chris discusses his group’s recent efforts to create new IMS materials, with a focus on dielectrics. As Chris explains, Ventec has developed several new dielectrics that can withstand much higher operating temperatures, one of which is UL-rated for a maximum operating temp of 155°C, which may be the highest for an IMS dielectric.



Copyright © 2020 I-Connect007. All rights reserved.