Front-End Expert Mark Thompson of Prototron Circuits Publishes Book on Producing the Perfect Data Package


Reading time ( words)

Mark Thompson, engineering support and CID+ at Prototron Circuits, sees thousands of data packages each year. He has seen the best (and the rest) and he understands that many data packages are far from perfect. Errors and inaccuracies slow the process down because the CAM department has to correct their data package or ask customers to clarify their intent. In the quick-turn prototype business where people pay for time, a slowdown on a three-day turn can be a disaster. I recently sat down with Thompson to find out more about his new book and discuss the quest for the perfect data package.

Dan Beaulieu: Mark, thanks for speaking with me today. First, tell me a little bit about yourself. 

Mark Thompson: Always a pleasure to talk with you, Dan. Prototron Circuits has been in business since 1987, but I joined in 1993. It's hard to believe it was 25 years ago. My background is from Silicon Valley in the 1980s. I started as a driller and worked in imaging for a few years, but for the vast majority of my time at Prototron, I've focused on signal integrity and doing calculations and dielectric stackups. We all wear a few hats, so I can go from previewing data before release to CAM and answering any customer questions that may arise.

I’ve also written a monthly column called “The Bare (Board) Truth.” I-Connect007 approached me many years ago and asked if I could write a column dedicated to PCB fabrication, since they already had excellent coverage of design and assembly. I was surprised at how well received some of my initial columns were. I think my column has done well because I will not write about anything I am not confident about; the information is always the truth as I know it. Recently, I have been more involved with site visits to educate our customers about what is needed to make the product they want and minimize costly revisions.

Beaulieu: With your experience in mind, tell us about your new book.

Thompson: The book is called The Printed Circuit Designer’s Guide to… Producing the Perfect Data Package. It provides guidelines for necessary minimum files to be able to fabricate a PCB and why fabricators need them.

Beaulieu: Why did you think this book was needed?

Thompson: For years, the PCB fabrication community has been asked for increasingly faster quotes, but the incoming data sets provided by some customers were rife with questions and inconsistencies. Sometimes data sets were completely missing essential files, all of which had to addressed before quoting and delayed the quote process. The book presents a complete list of necessary files and even discusses how to select a board class based on reliability needs. I also offer some tips and tricks to streamline fabrication.

Beaulieu: Why is Prototron particularly interested in receiving perfect data packages?

Thompson: As I mentioned before, if we can get a data set that is complete and has no conflicting information that requires additional clarification before quoting, we can quote the job faster. It seems counterintuitive that a customer would be frustrated by the questions being asked by fabricators, which stem from conflicting or missing information. There is a fine line between due diligence and being a pest.

Beaulieu: Can you give me some examples of the type of mistakes you have seen in customer data packages?

Thompson: Heck, yes. Missing NC Drill files, drawings, plating statuses, count discrepancies, impedance callouts for traces that do not exist on the data, etc. I could go on and on. Many of these issues could be eliminated or at least minimized by a thorough design review of the output package provided to fabricators.

Beaulieu: Could you give us some highlights that readers can look forward to in the book?

Thompson: The book discusses the necessary files for a great output package for PCB fabrication, and simple things that can minimize the time spent in a fabrication CAM department, such as IPC netlist errors, how to format files consistently, etc. Additionally, I provide a checklist that can be used to ensure the customers’ output package is complete.

Beaulieu: There is a lot of talk about this technology right now. Why is it so vital at this time?

Thompson: As fast-turn and prototype folks, I can only tell you that we’ve seen a lot more space and flight applications, medical device advances, and RF devices. All of this should make perfect sense, considering how vital our tables and phones have become.

Beaulieu: Who should read this book?

Thompson: Engineering, mechanical, and layout personnel should read it, as well as PCB designers, contract manufacturers, and anyone else who is creating the output data set for fabrication.

Beaulieu: Are you optimistic about getting better data packages in the future?

Thompson: Without a doubt! The millennial generation of designers and engineers are hungry for additional help on what can improve the whole process from design inception to final assembly and product support.

Beaulieu: Once again, congratulations on this effort, and on behalf of the industry, thank you for writing this book. It sounds like we certainly need it.

Thompson: Yes. Thank you for your time.

Click here to download your free copy of Prototron's new eBook 'The Printed Circuit Designer’s Guide to… Producing the Perfect Data Package' today!

Share

Print


Suggested Items

Words of Advice: Drawbacks to Your PCB Data Format?

08/15/2019 | Andy Shaughnessy, Design007 Magazine
In a recent survey, we asked the following question: What is the biggest drawback to your current PCB data format? Here are a few of the answers, edited slightly for clarity.

IPC Reliability Forum Wrap-up With Brook Sandy-Smith

08/12/2019 | Andy Shaughnessy, Design007 Magazine
I attended the recent IPC High-Reliability Forum and Microvia Summit in Baltimore, Maryland. The speakers and panelists focused on a variety of topics, but one issue that kept popping up was the failure of some microvias on military and aerospace PCBs. Fortunately, some smart technologists are focusing on determining the cause of these via failures. I asked Brook Sandy-Smith, IPC’s technical education program manager, to give us a quick wrap-up of this event.

Denny Fritz: The Difference Between Quality and Reliability

08/06/2019 | Andy Shaughnessy, Design007 Magazine
I recently spoke with industry veteran (and I-Connect007 columnist) Denny Fritz about the relationship between quality and reliability—two terms that are unequal but often used interchangeably. We also discuss the current state of lead-free solders in the U.S. military and defense market as well as the microvia reliability issues Denny focused on at IPC’s High-Reliability Forum and Microvia Summit in Baltimore, Maryland.



Copyright © 2019 I-Connect007. All rights reserved.