Mentor Xpedition and PADS Professional Win ISO 26262 Functional Safety Compliance

Reading time ( words)

Mentor, a Siemens business, announced that the Xpedition and PADS Professional printed circuit board design (PCB) design flows, including the Valor NPI and HyperLynx family of products, have each achieved ISO 26262 functional safety compliance. Mentor has met the requirements for validation and confirmation measures, providing confidence that a sufficient and acceptable level of safety can be achieved using these Mentor PCB products. The Xpedition and PADS Professional flows and related documentation were evaluated by TÜV SÜD, an internationally accredited independent testing and conformity assessment company, and certified to achieve ISO 26262 Tool Confidence Level 1 for ASIL A through ASIL D.

ISO 26262 establishes a unifying, industry-specific standard for the functional safety and expected reliability of E/E systems in passenger vehicles. With the certification of these Mentor products, automotive design teams can now use either Mentor PCB design flow for performance efficiency, predictability, and productivity for functional safety.

“Safety is a key design requirement for automotive electronics systems. It’s critical that design teams can confidently design to fully meet Functional Safety requirements,” said Mike Varnau, President at Reliability Solutions. “Now that Mentor’s PCB design tools are ISO 26262 certified, design teams can now confidently design compliant products faster at lower cost with less risk.”

The Xpedition and PADS Professional flows are certified for tool confidence level 1 (TCL-1) across ASIL A through D levels. Mentor’s PCB design flow provides design entry, logical and functional schematic validation, and PCB layout. Complementing the Xpedition and PADS Professional Mentor flows, signal integrity, power integrity, thermal analysis, and new product introduction (NPI), are achieved by using the HyperLynx and Valor NPI tools, respectively.

“Achieving ISO 26262 compliance for our Xpedition and PADS Professional flows, including our supporting tools, ensures that our customers can design automotive electronic systems with the greatest confidence in functional safety compliance,” stated A.J. Incorvaia, vice president and general manager, Mentor Board Systems Division. “As a result, our systems design portfolio will help our customers achieve success in reliable and innovative automotive products development.”

The certification of the Xpedition and PADS Professional flows with their supporting tools expands the Mentor Safe program into printed circuit board design. Mentor Safe is one of the industry’s broadest and most comprehensive ISO 26262 qualification and certification programs, established to help automotive and industrial customers rapidly navigate the increasing complex process of functional safety certification with confidence.

Mentor is sponsoring the Integrated Electronics Solutions Forum (IESF) 2018 in Plymouth, MI on September 19, 2018. Mike Varnau, president of Vanau-Mack Engineering will present, “A Methodology and Design Flow for ISO 26262 PCB Design.” To register, click here.

About Mentor Graphics

Mentor Graphics Corporation, a Siemens business, is a world leader in electronic hardware and software design solutions, providing products, consulting services, and award-winning support for the world’s most successful electronic, semiconductor, and systems companies. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777.


Suggested Items

Simon Fried: Additive Manufacturing Through Printed Electronics

10/17/2018 | Barry Matties, Publisher, I-Connect007
Simon Fried, president of Nano Dimension, discusses how the company has taken the additive manufacturing process to the next level through printed electronics. He also shares his thoughts on the growing demand for 3D circuits, as well as how this could potentially be a game-changer for PCB designers.

Cadence: Bullish on AI

10/15/2018 | Andy Shaughnessy, Design007 Magazine
David White has been involved with artificial intelligence research for almost 30 years. Now, David is the senior group director of R&D for Cadence Design Systems, and I knew we’d have to speak with him for this issue on AI. In a recent interview, we discussed his decades of work in AI, Cadence’s research into AI and machine learning, and what he believes AI could mean for the EDA tools of the future.

Artificial Intelligence: The Future of EDA?

10/10/2018 | Andy Shaughnessy, Design007 Magazine
Artificial intelligence (AI) has been making inroads into a variety of industries in the past decade or so, from automobiles to medical devices. Naturally, EDA tool companies are taking a look at AI. Does AI offer a way forward for PCB design tool developers? I recently interviewed Paul Musto, director of marketing for the Board Systems Division of Mentor. We discussed Mentor’s plans for integrating AI into EDA tools, and why we may be at the very beginning of understanding the pros and cons of this new technology.

Copyright © 2018 I-Connect007. All rights reserved.