August Issue of Design007 Magazine Available Now


Reading time ( words)

This month, in the August issue of Design007 Magazine, we unpack the intricacies of PCB packaging. Over the past 60 years, packages have continued to shrink. The transistor outline “metal cans” of the 1950s would look out of place today. Some packages are no bigger than the period at the end of this sentence, complete with their own “inhalation warning.”

Learn more in this month's issue of Design007 Magazine, now on the virtual newsstand and available for delivery in your e-mailbox each month by subscribing here.

Be sure to download the PDF copy for future reference.

Share


Suggested Items

Help Wanted: PCB Design Layout Specialist

08/10/2018 | Mike Creeden, San Diego PCB
I was told recently that the designer, aka the PCB layout specialist, is a dying breed soon to be extinct. I wish to reassure my fellow designers that, in my opinion, you are in the catbird seat. You are in hot demand and you should have great opportunities for the remainder of your career. By the way, after reading this article, you may feel empowered to go ask for a raise. Please don’t tell your manager that I sent you!

Sensible Design: Protecting PCBs from Harsh, Challenging Environments

07/03/2018 | Alistair Little, Electrolube
Think very carefully about the sort of environment your PCB is likely to encounter. It is easy to over-engineer a product so that it will survive the very worst of conditions, but worst conditions may only be fleeting or transient. Therefore, a resin solution with a lower temperature performance specification will often cope. Take temperature extremes, for example. Your application may experience occasional temperature spikes of up to 180°C, which you might feel deserves treatment with a special resin.

Design and Manufacturing Perspectives from DISH Technology’s Les Beller

05/30/2018 | Barry Matties, I-Connect007
I recently interviewed Les Beller, a long-time PCB designer who is now a manufacturing engineer for DISH Technology. We discussed his company’s business shift towards 5G and streaming, and the stresses that puts on a design team. He also explains the greatest challenges that he’s facing with HDI and higher frequencies, and the added importance for designers to understand the manufacturing process and DFM tools.



Copyright © 2018 I-Connect007. All rights reserved.