DownStream Technologies Present Two Webinars in June

Reading time ( words)

If you haven't seen DownStream’s software solutions, here are a few great opportunities to watch them live. During these two webinars, attendees will witness all DownStream has to offer.

Technical staff will walk you through the DFM solution designed to streamline the process between design and fabrication. DFMStream will help designers to create flawless designs that get through production the first time, saving you time and money.

Attendees will also learn how BluePrint-PCB will automate and streamline your PCB Documentation efforts. It eases the creation while making them easier to share, utilize, and update.

Wednesday, June 12

CAM350/DFMStream: Create Flawless Designs While Streamlining the Process

To register for this webinar, click here.

Thursday, June 13

BluePrint-PCB: Automate and Perfect PCB Documentation

To register for this webinar, click here.


Suggested Items

Everyone Wants Change: Who Wants to Lead the Way?

01/25/2023 | Nolan Johnson, I-Connect007
Nolan Johnson recently met with Alun Morgan, technology ambassador at Ventec, and Ventec COO Mark Goodwin to discusses the industry’s determination to cling to outdated processes and standards, and some potential consequences. To maintain efficiency and keep pace with the market’s newest entries in Asia, Alun and Mark believe that legacy companies in the West must be open to challenging conversations that will require questioning old practices and revising those practices toward sustainability.

Physics, Electrical Engineering, and PCB Design

12/20/2022 | Tamara Jovanovic, Happiest Baby
When I was a sophomore in college, I had an amazing professor for Physics II: Electricity and Magnetism. He made a series of complex topics fun to learn, and his personality and way of teaching were almost tailor-made for the way I like to learn. He explained new concepts through practical examples, and always kept students engaged throughout the class, making sure everyone understood the lectures. Physics II was an engineering prerequisite, and I didn’t mind taking the class since I really enjoyed the material. However, I did find myself wondering a few times, “Will I ever use any physics in real life?” It turns out that the answer to the question was yes.

Electronics vs. Physics: Why Vias Don’t Get Hot

12/06/2022 | Douglas Brooks, Consultant, and Johannes Adam, ADAM Research
Most of are aware that when we pass an electrical current through a trace (conductor), the trace will heat up. This temperature increase is caused by the I2R power loss dissipated in the resistance of the trace. The resistance of a copper trace is mostly determined by its geometry (cross-sectional area), and there are lots of studies trying to look at the relationship between the current down a trace (of known size) and the resulting temperature of the trace. But the situation is much more complicated than this. There are physical properties that exist that result in helping to cool the trace. These properties are usually a combination of conduction of the heat away from the trace through the material, convection of the heat away from the trace through the air, and radiation of the heat away from the trace.

Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.