Autonomous Transportation: Using Disruptive Technologies to Create Social Disruption and Change


Reading time ( words)

Those of us who have been driving for the last 50−60+ years have seen great change. At first, it was slow; we went from manual shift to automatic shift transmissions, then we started adding simple things such as FM radio (yes, that was a premium add-on in the early ‘60s), then air conditioning and power windows, fuel injection, cruise control, airbags, and in the last decadeeverything from GPS to LED lighting to automatic speed and distance control, back-up and surrounding cameras and so much more. Many of these additions are now considered standard features and some are still premium add-ons; however, the trend is that today’s premium add-ons on a very high-end car will become standard on an economy vehicle after a few years.

Many of these features added comfort, entertainment and convenience; however, many also improved safety (e.g., airbags), driver capability and reliability (over the last few years, computer diagnostics). For example, computer diagnostics has significantly shaped the way that automobile owners maintain their cars. Since the turn of the  century, cars have increasingly been built with  on-board computers to warn owners regarding power train problems or other issues before any damage is done. Before the addition of computer diagnostics technology, most car owners did not know something was failing until something actually did. At first, these advances were slow to arrive—every few years there would be something new—then a few years later it would become commonplace. But lately, just as the rate of advance has accelerated for everything, so has it been for the transportation industry.

To read the full version of this article which appeared in the April 2018 issue of PCB007 Magazine, click here.

Share




Suggested Items

Realizing the Promise of IPC-1791

05/09/2023 | Chris Mitchell, IPC Vice President of Global Government Relations
IPC-1791, Trusted Electronic Designer, Fabricator and Assembler Requirements, is an electronics standard developed in collaboration with the U.S. Department of Defense (DoD) and industry to address some of today’s greatest risks to a trusted supply chain. The standard provides traceability and helps protect against counterfeits. In fact, IPC-1791 was specifically cited in the U.S. Department of Commerce response to Executive Order 14017-Securing America’s Supply Chains.

Onboarding 101 With Mike Hoyt

05/05/2023 | Andy Shaughnessy, Design007 Magazine
You’ve decided to revamp your process for onboarding new hires, but where do you start? How do you create a thorough onboarding system that allows each new hire to become a happy, long-term employee? I asked Mike Hoyt, IPC’s training advisor, to discuss the organization’s onboarding program, the hiring issues facing companies in the PCB space, and the best way to get aboard a new onboarding process.

Chemical Legislation and Restrictions on Solder Masks

04/27/2023 | Chris Wall, technical director, Electra Polymers
Ever since liquid photoimageable solder masks (LPISMs) were introduced, their UV exposure speed has been a key factor in their performance. The LPISM is coated onto the PCB, dried, and then selectively exposed with UV light via a phototool, or more recently, via direct imaging using LED or lasers. The exposed areas polymerise and become insoluble in the developing solution. The polymerisation is initiated by one or more chemicals called photoinitiators, which are components of the LPISM.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.