Ucamco Updates Gerber File Specification


Reading time ( words)

Ucamco has released version 2018.05 of the Gerber Format Specification. The document is available on the Gerber download page on Ucamco's website. Click here to view this latest release.

About Ucamco

Ucamco (formerly Barco ETS) is a market leader in PCB CAM software, photoplotting and direct imaging systems, with a global network of sales and support centers. Headquartered in Ghent, Belgium, Ucamco has over 25 years of ongoing experience in developing and supporting leading-edge photoplotters and front-end tooling solutions for the global PCB industry. Key to this success is the company's uncompromising pursuit of engineering excellence in all its products. Ucamco also owns the IP rights on the Gerber File Format through its acquisition of Gerber Systems Corp. (1998).

For more information, click here.

Share




Suggested Items

The Survey Said: Why Don’t You Know Your Fabricator?

06/23/2022 | I-Connect007 Editorial Team
When we want to find out what challenges our readers are facing, we just ask. And they don’t mind sharing—the good, the bad, and the ugly. In a recent survey, we asked our PCB designer readers, “Why don’t you know who is going to manufacture your boards?” Here are some of more interesting replies we received, edited slightly for clarity. Do you see yourself in these replies?

The Survey Said: Designing Around Missing Data

06/09/2022 | Andy Shaughnessy, Design007 Magazine
One of the best tools we have for keeping our fingers on the pulse of the industry is the reader survey. When we want to find out what’s going on, we just ask. Fortunately, our readers are not a shy bunch of folks. They don’t mind sharing—the good, the bad, and the ugly. In a recent survey, we asked our PCB designer readers, “What missing information or data (impedance requirements, library data, etc.) do you find yourself having to ‘design around’?”

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/08/2022 | Andy Shaughnessy, Design007 Magazine
Spring has definitely sprung, and the trade show season continues to roll right along. Managing Editor Nolan Johnson just returned from DesignCon 2022, and as he says in his review, the attendance was up from last year’s event, which had been at the McEnery Convention Center in the waning days of the pandemic. I hope we’re getting back to normal, whatever that means. This week, we have a few articles about Industry 4.0, as well as a column on setting your priorities. We have a cool article about methods for measuring the breakdown of resins during multiple thermal laminations, and a conversation with an EMS company president who realized that he was actually running a data collection firm that happened to make circuit boards. Can you say the same about your own company?



Copyright © 2022 I-Connect007. All rights reserved.